REPLACE COUNTER PROBLEM

[hilalseker]

Hi All,

In this case, I have 2 measuring points. When I go to IK11 and EDIT - REPLACE COUNTER this button is active, other one inactive. Compare both measurement document, but I did not found anything. Can you help me?

Thank you for your support.

[RAHEEL_BABAR · Accepted solution]

Hi,

Its because 800156 is not a counter.

Please go to IK03 and check for 8000165 there is not check is active for Measure point is counter.

And 800155 have check for counter

Regards