- For Interface 1/0/2, set the minimum bandwidth to 15 for queue 0.
- Select QoS > CoS > Advanced > Interface Queue Configuration.
A screen similar to the following displays.
- In the Queue ID list, select 0.
- Under Interface Queue Configuration, scroll down and select the interface 1/0/2 check box.
Now 1/0/2 appears in the Interface field at the top.
- Enter the following information:
- In the Minimum Bandwidth field, enter 15.
- In the Scheduler Type list, select Weighted.
- Click Apply to save the settings.
- For interface 1/0/2, set the minimum bandwidth 25 for queue 1, and set the scheduler type to strict.
- Select QoS > CoS > Advanced > Interface Queue Configuration.
A screen similar to the following displays.
- In the Queue ID list, select 1.
- Under Interface Queue Configuration, scroll down and select the interface 1/0/2 check box.
Now 1/0/2 appears in the Interface field at the top.
- Enter the following information:
- In the Minimum Bandwidth field, enter 25.
- In the Scheduler Type list, select Strict.
- Click Apply to save the settings.
For more information, see the following support articles:
This article applies to the following managed switches and their respective firmware:
- M5300 - firmware version 10.0.0.x
-
- M5300-28G (GSM7228S)
- M5300-5G (GSM7252S)
- M5300-28G3 (GSM7328Sv2h2)
- M5300-52G3 (GSM7352Sv2h2)
- M5300-28G_POE+ (GSM7228PSv1h2)
- M5300-52G-POE+ (GSM7252PSv1h2)
- M5300-28GF3 (GSM7328FSv2)
- M4100 - firmware version 10.0.1.x
-
- M4100-26G (GSM7224v2h2)
- M4100-50G (GSM7248v2h2)
- M4100-26G-POE (GSM7226Pv1h1)
- M4100-50G-POE+ (GSM7248Pv1h1)
- M4100-26G-POE (FSM7226Pv1h1)
- M4100-50-POE (FSM7250Pv1h1)
- M4100-D12G (GSM5212v1h1)
- M4100-D10-POE (FSM5210Pv1h1)
- M7100 - firmware version 10.0.1.x
-
- XSM7224S - firmware version 9.0.1.x
Last Updated:03/16/2023
|
Article ID: 21742