ADMETTRE STL-2206 Stainless Steel Ultrasonic Smart Humidifier User Manual

Power ON/OFF and Mist Levels Button

1. The first short press on the button is POWER ON, and the machine works in lowest mist level, which is the default mist mode.
2. Then, press again, the machine works in middle level mist mode.
3. If you press again after the middle level mist, the machine will work in the highest mist level.
4. If you continue to press after the 3st step, the machine will POWER OFF. And the LED will close immediately. However the inside Fan will turn off after 15 seconds which blow away the rest fog in the product.

Timer Function

1. The default Timer is not enable.
2. When the machine is working on one of mist level, you can set the timer. The timer will set on the 04H –> 08H –>12H –> OOH mode, which press again and again.
3. If you press the button the first, the timer will display 04H auto leaping and flashing. And after the timer auto leaping and flashing 5 times , the timer will start work. Then, the machine will be turn off after working 4 hours.
4. And if you press on the button while is 08H/12H, the same as the 3st step.
5. And if you select the OOH mode which also as the 3st step, the Timer will turn off.

1. The default Night Light is turn on when the machine is working on one of mist level. While the machine turn off, the Night Light will also turn off.
2. If you short press on the button, the tank light will turn on/off.
3. When the LED and tank light is light up, If you press on the button last 2 seconds, the LED and tank light will both turn off. And then you short press on the button , the LED and tank light will light up.

1. A. When the environment humidity around the humidifier is higher than your desired humidity, the humidifier automatically turn off.
2. B. When the environment humidity around the humidifier is lower than your desired humidity, the humidifier automatically turn on.

How to set your desired humidity to the product chips?

1. The default function is not enable. And there is a chips which store the humidity your desired .
2. When the machine is working on one of mist level, you can set your desired humidity .
3. You can set your desired humidity from 40% to 80%, and the humidity will increase 5% after you press on one time. For example, if your desired humidity is 60%, you should press on the button 5 times. When you press on button first, the chips storing your desired humidity is 40%. And the humidity will increase to 60% through another 4 times press. After these press, you should wait for 2 seconds, and then your desired humidity 60% will be stored in the chips.

How to work?
5. If you have finished the 3st and 4st step. The product will turn on and off automatically by comparing your desired humidity with the environment humidity around the humidifier.

How to Clear the chips’ humidity?
6. You should press the button to humidity 80%,and then press the button more one time. It is just as a recycle.

1. Please clean the humidifier as the operation regularly, and turn off the power before cleaning.