About This Listing

This headset microphone from Shure features snap-fit windscreens that stay in place during intensive movement.

Shure Beta 54 Headset Microphone
The Shure BETA 54 is a subminiature, electret condenser headworn microphone. It provides uncompromised sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring. Despite the small size, the condenser element delivers full, clear, and natural reproduction of speech and vocals.

The microphone features a durable, low-profile wire frame headband which is fully adjustable for stability and comfort. A plastic carrying case protects the microphone and its accessories.

Features:
- Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
- Extended frequency response tailored for vocal performances
- Able to handle extremely high sound pressure levels (SPL)
- Snap-fit foam windscreens stay in place during intensive movement

Specs:
- Type: Condenser (electret bias)
- Frequency Response: 50Hz to 20KHz
- Polar Pattern: Supercardioid
- Output Noise (equivalent dBSPL, A-weighted) : 39.0 dB typical; 42.0 dB maximum
- Signal-to-Noise Ratio: 55.0 dB at 94 dB SPL
- Recommended Minimum Input Impedance: >1 kilohm
- Preamp Output Impedance: 136 ohms
- Output Level, open circuit, ref. 1v/Pa at 1 kHz: -52.0 +/- 3.0dB 2.51mV
- Maximum Sound Pressure Level: 149 dBSPL at 1% THD/1 kilohm load
- Dynamic Range: 110 dB (max. SPL with 1k load, minus typical A-wt. noise)
- Current Drain: 4.6 mA (preamp and microphone) - Output Polarity:
- Positive pressure on the diaphragm produces a positive voltage at: Pin 2 relative to pin 3 at the output connector of the preamp
- Power Requirements: Phantom power; 11 to 52 Vdc positive on pins 2 and 3, return on pin 1 (ground)
- Net Weight: 135.35 g (4.75 oz.) microphone and in-line preamp
- Cable: 1.5 m (5 ft.), small-diameter, shielded, with mini 4-pin connector (TA4F)

zZounds is an authorized dealer of Shure products.

Condition
Brand
Model
  • WBH54T Beta 54 Supercardioid Headworn Condenser Microphone
Categories
Microphone Type
  • Headset
  • Small-Diaphragm Condenser
Polar Pattern
  • Supercardioid
Wired/Wireless
  • Wired
Electronics
  • Analog
  • Solid State

About the Seller

zZounds

Oakland, NJ, United States
(42,751)
Joined Reverb:2016
Items Sold:79,990
Shure Beta 54 Headset Condenser Microphone, Tan, with TA4F Connector
Shure Beta 54 Headset Condenser Microphone, Tan, with TA4F Connector
$319

About This Listing

This headset microphone from Shure features snap-fit windscreens that stay in place during intensive movement.

Shure Beta 54 Headset Microphone
The Shure BETA 54 is a subminiature, electret condenser headworn microphone. It provides uncompromised sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring. Despite the small size, the condenser element delivers full, clear, and natural reproduction of speech and vocals.

The microphone features a durable, low-profile wire frame headband which is fully adjustable for stability and comfort. A plastic carrying case protects the microphone and its accessories.

Features:
- Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
- Extended frequency response tailored for vocal performances
- Able to handle extremely high sound pressure levels (SPL)
- Snap-fit foam windscreens stay in place during intensive movement

Specs:
- Type: Condenser (electret bias)
- Frequency Response: 50Hz to 20KHz
- Polar Pattern: Supercardioid
- Output Noise (equivalent dBSPL, A-weighted) : 39.0 dB typical; 42.0 dB maximum
- Signal-to-Noise Ratio: 55.0 dB at 94 dB SPL
- Recommended Minimum Input Impedance: >1 kilohm
- Preamp Output Impedance: 136 ohms
- Output Level, open circuit, ref. 1v/Pa at 1 kHz: -52.0 +/- 3.0dB 2.51mV
- Maximum Sound Pressure Level: 149 dBSPL at 1% THD/1 kilohm load
- Dynamic Range: 110 dB (max. SPL with 1k load, minus typical A-wt. noise)
- Current Drain: 4.6 mA (preamp and microphone) - Output Polarity:
- Positive pressure on the diaphragm produces a positive voltage at: Pin 2 relative to pin 3 at the output connector of the preamp
- Power Requirements: Phantom power; 11 to 52 Vdc positive on pins 2 and 3, return on pin 1 (ground)
- Net Weight: 135.35 g (4.75 oz.) microphone and in-line preamp
- Cable: 1.5 m (5 ft.), small-diameter, shielded, with mini 4-pin connector (TA4F)

zZounds is an authorized dealer of Shure products.

Condition
Brand
Model
  • WBH54T Beta 54 Supercardioid Headworn Condenser Microphone
Categories
Microphone Type
  • Headset
  • Small-Diaphragm Condenser
Polar Pattern
  • Supercardioid
Wired/Wireless
  • Wired
Electronics
  • Analog
  • Solid State

About the Seller

zZounds

Oakland, NJ, United States
(42,751)
Joined Reverb:2016
Items Sold:79,990

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.