-
Locate the product’s IP address. The IP address can be found on the control panel:
x476, and X576 models only: Touch the network
icon at the top of the display.
-
Enter the product's IP address into a web browser address line. Press the Enter key on the computer keyboard.
Figure : Example of an IP address in a browser window
The product's Embedded Web Server (EWS) home page displays.
Figure : Example of EWS home page
-
Click the Scan tab.
Figure : Example of scan screen
-
On the left navigation pane, click Scan to Email Setup.
-
On the Redirecting to Secure Page dialog box, click OK.
The Redirecting to Secure Page dialog box indicates that the browser is being redirected to a secure Web page. The information on the secure Web page will be encrypted for protection and privacy purposes.
The Web browser might display a message about the Web site's security certificate. Since the Web page is secure, click Continue to this website.
-
Click on the Scan to Email Setup.
Figure : Example of Outgoing Email Profiles screen
-
On the Scan to Email Setup screen, complete the following:
-
Default From: The email address that will display as the sender of the email.
Example: robert.smith@mycompany.com
-
Default Display Name: The name that will appear on the product control panel when the scan to email function is used.
Example: Robert Smith
-
SMTP Server: The SMTP server address for the network.
-
SMTP Port: The SMTP port number is set to 25 by default.
SMTP server addresses typically have this format: smtp.company.com or smtp.provider.com. SMTP server addresses may also contain a number or a geographic location.
note:
If you are unsure of the SMTP server address, check with your IT department, Internet service provider, or email service provider.
note:
The SMTP port number is set to 25 by default. You should not need to change it. However, if this setting if different from the default, your IT department or Internet service provider should be able to provide to correct setting.
-
Email Log-in Authentication: This information is required only if the email system or Internet service provider require additional security authentication. The User ID and password for email log-in authentication are encrypted. The product control panel will only display the sender's email address and the display name when the scan to email function is used.
Figure : Example of Outgoing Profiles screen completed:
To test the configuration, use the Outgoing Email Test feature at the button of the screen, add a destination email address, and then click on Save and Test.
Figure : Example of Outgoing Email Test
note:
If the test fails, make sure to have a DNS address in the printer network configuration, this can be checked by going into the Network menu either on the EWS or the printer's front panel.