- New Products
- Volume Discount is available
- Rapid Design
Dowel Pins (MSH6-16)
Straight, Undersized, One End Chamfered, One End Radiused, h7 Tolerance
Edit Part Configuration
Drawing/Specifications
・Materials
Type | [ M ]Material | [ H ]Hardness |
MSH | 440C or 420 Stainless Steel | 45~50HRC |
MSHS | 304 Stainless Steel | - |
Specifications
Part Number | - | L |
MSH2 MSGB3 | - - | 6 12 |
ℓ1 | Dh7 | Part Number | L | ||||||||||||||||||||||||
Type | D | ||||||||||||||||||||||||||
0.4 | 0 - 0.01 | MSH | 1 | 4 | 5 | 6 | 8 | 10 | 12 | ||||||||||||||||||
1.2 | 4 | 5 | 6 | 8 | |||||||||||||||||||||||
0.6 | 1.5 | 4 | 5 | 6 | 8 | 10 | 15 | 16 | |||||||||||||||||||
1.6 | 4 | 5 | 6 | 8 | 12 | ||||||||||||||||||||||
1 | 2 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 25 | 30 | |||||||||||||
2.5 | 6 | 8 | 10 | 12 | 15 | 20 | 25 | 30 | |||||||||||||||||||
3 | 6 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 25 | 30 | 32 | 35 | 40 | 45 | ||||||||||||
1.5 | 0 - 0.012 | 4 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 22 | 25 | 30 | 35 | 40 | 45 | 50 | ||||||||||
5 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 24 | 25 | 28 | 30 | 35 | 40 | 45 | 50 | |||||||||||
2 | 6 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 22 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | |||||||||
0 - 0.015 | 8 | 10 | 14 | 15 | 16 | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 80 | ||||||||||||
2.5 | 10 | 15 | 18 | 20 | 25 | 30 | 35 | 40 | 50 | 60 |
ℓ1 | Dh7 | Part Number | L | ||||||||
Type | D | ||||||||||
0.3 | 0 - 0.01 | MSHS | 0.9 | 5 | 6 | 8 | 10 | ||||
0.4 | 1 | 5 | 6 | 8 | 10 | 12 | |||||
0.6 | 1.5 | 5 | 6 | 8 | 10 | 12 | |||||
1 | 2 | 5 | 6 | 8 | 10 | 12 | 15 | 18 | 20 | ||
2.5 | 6 | 8 | 10 | 12 | 15 | ||||||
3 | 6 | 8 | 10 | 12 | 15 | 18 | 20 | ||||
1.5 | 0 - 0.012 | 4 | 8 | 10 | 12 | 15 | 18 | 20 | |||
5 | 8 | 10 | 12 | 15 | 18 | 20 | |||||
2 | 6 | 10 | 12 | 15 | 18 | 20 | |||||
0 -0.015 | 8 | 15 | 18 | 20 |
3D Preview
Part Number Being Previewed:
- Please use our configuration tools to update this preview to your specific part.
Loading...
Part Numbers
Part Number |
---|
MSH6-16 |
Loading...
More Information
More Information
[ ! ]The identification groove is available for MSH only.
[ ! ]Ø1.5 or smaller pins have no identification groove.
[ ! ]ℓ1 dimension may become larger than the value shown in the catalog due to polishing process.
[ ! ]Ø1.5 or smaller pins have no identification groove.
[ ! ]ℓ1 dimension may become larger than the value shown in the catalog due to polishing process.
Catalog
-
Shape
-
Straight/Parallel Joggling
-
-
Material Details
- Stainless Steel
- Stainless Steel
-
Type
- Straight
-
End Shapes
- One Side Tapered, One Side Spherical
-
type
- MSH
- MSHS
-
Material
SUS440C or 13Cr Stainless Steel
- Stainless Steel
- Stainless Steel
-
Diameter(mm)
-
Length(mm)
-
CAD
- 2D
- 3D
-
Days to Ship
- All
- Same Day
- 4 Days or Less
Specify Alterations
Products like this...
Part Number |
---|
MSH1-5 |
MSH1-6 |
MSH1-8 |
MSH6-18 |
MSH6-20 |
MSH6-22 |
Additional Products in this Category
- Dowel Pins - Stepped
- [Clean & Pack] Dowel Pins - Positive Tolerance, End Shape: One End Tapered, One End Spherical, Fit Tolerance: +0.01/+0.005
- Parallel Pin, Former JIS M6
- Dowel Pin M6
- Stainless Steel Parallel Pin, B Type/Soft (h7)
- Taper Pin TP-ST-D/TP-SUS-D
- Dowel Pins - Alloy Steel, Black Oxide Coated, Inch
- Pull Dowel Pins - Heat Treated Alloy Steel, 8 RMS Bright Microinch Finish, Inch
Your comments help us improve our website. Give feedback