About the JBL GTO Series GT100
JBL knows that everybody has different tastes in bass that's why they designed GTO Series subwoofers to work great in sealed, vented, or bandpass enclosures. JBL packed over a half century of speaker-building experience into creating these GTO subs, so you can hear bass the way you like it!
The GT100 10" subwoofer comes out swinging with a polypropylene cone that's lightweight and ultra-efficient, so you won't need as much power to push your bass. But if you like it louder than life, the butyl rubber surround, dual 40-ounce magnets, and progressive spider ensure that this woofer won't bottom out when the going gets tough.
Details:
- polypropylene cone with butyl rubber surround
- dual 40-ounce magnets
- power range 55-250 watts RMS
- peak power 1,000 watts
- frequency range 28-500 Hz
- sensitivity 90 dB SPL
- impedance 4 ohms
- top-mount depth 5-5/8"
- sealed box volume 0.75 cubic feet
- ported box volume 1.75 cubic feet
- Recommended Q-Logic Box Type: 1
- 1-year warranty
Priced per speaker
What's in the box:
JBL GTO Series GT100 owner's manual
- One 10" woofer
- Owner's Manual
- Technical Data sheet
- Warranty card
- "JBL" sticker
Customer reviews for JBL GTO Series GT100
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JBL GTO Series GT100
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Butyl rubber | |
Port diameter (inches) | 3 | |
Port length (inches) | 11.96 | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
90 dB at 2.83 volts | |
Frequency Response | 28 - 500 Hz | |
Max RMS Power Handling | 250 | |
Peak Power Handling (Watts) | 1000 | |
Top Mount Depth (inches) | 5 5/8 | |
Bottom Mount Depth (inches) | 6 1/8 | |
Cutout Diameter or Length (inches) | 9 1/8 | |
Frame Width | 10.144 | |
Frame Length | 10.144 | |
Vas (liters) | 36.1 | |
Fs (Hz) | 29.6 | |
Qts | 0.42 | |
Xmax (millimeters) | 12.5 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.75 | |
Minimum Sealed Box Volume (cubic feet) | 0.75 | |
Maximum Sealed Box Volume (cubic feet) | 0.75 | |
Ideal Ported Box Volume (cubic feet) | 1.75 | |
Minimum Ported Box Volume (cubic feet) | 1.75 | |
Maximum Ported Box Volume (cubic feet) | 1.75 |
Product Research
Features
Enclosure Compatibility
Polypropylene Woofer Cone: The woofer cone is made with polypropylene for exceptional transient attack. The cone is light, but strong enough to maintain its shape at high output levels.
Butyl Rubber Surround: A butyl rubber surround is used to guarantee long-term reliability by rejecting moisture and ultraviolet contamination.
Progressive Spider: This woofer is made with a progressive spider. A progressive spider is used because it provides better control than a linear spider at the woofer's excursion limits.
High SPL: A long Xmax (cone excursion limit) and dual 40 oz. magnets make this woofer ideal for high output applications.
Recommended Sealed Box Volume: JBL recommends a 0.75 cu/ft sealed enclosure.
Recommended Ported Box Volume: JBL recommends a ported box with an internal volume of 1.75 cu/ft. One 3" diameter x 11.96" long port should be used with a 1.75 cu/ft enclosure.
Recommended Sealed Bandpass Box Volume: JBL recommends a bandpass box with an internal volume of 3.0 cu/ft. The 3.0 cu/ft enclosure should have a sealed chamber volume of 1.75 cu/ft and a ported chamber volume of 1.25 cu/ft. One 4" diameter x 6.81" long port should be used in the ported chamber.
The JBL GTO Series GT100 replaces these items
JBL GT1041
- Polypropylene cone
- rubber surround
- 18-275W RMS power range
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...