English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Support
Details
View of the units
Side view
The included accessories
View of the packaging
TP-LINK TL-WPA271KIT allows network connection through existing power line. The pair or a set of the powerline adapters is an ideal solution in every case where it is impossible to install Ethernet cables or the environment between some points is not suitable for a wireless medium. One of the two units is equipped with wireless access point (AP) providing wireless connectivity for laptops, tablets, smartphones etc.
The pair of the powerline adapters is an ideal solution when it is impossible to install Ethernet cables
or the environment does not allow to use wireless connectivity between the points
or the environment does not allow to use wireless connectivity between the points
Distinguishing features:
- The kit includes two units,
- AP is installed in one of the units,
- Compatibility with HomePlug AV,
- Data transfer rate (over power line) up to 200 Mbps,
- WiFi 802.11n 150 Mbs AP,
- Plug&Play installation,
- Small size of each unit.
The user needs as many units as the number of the AC power outlets that are to be simultaneously used as the nodes of the computer network.
The set of the powerline adapters is an ideal solution when it is impossible to install Ethernet cables
or the environment does not allow to use wireless connectivity between some points
or the environment does not allow to use wireless connectivity between some points
TL-WPA271KIT is another "wireless" solution to provide Internet connectivity in homes and small businesses, offices etc. Thanks to Plug and Play installation, it is easy to use. The solution utilizes the existing electrical wiring to build local area network. The network can be extended to any point in the apartment, house, office etc. where exists a power outlet, without the need of installing new Ethernet cable/s or experimenting with a "purely wireless" network.
The installation of the TL-WPA271KIT is very simple. The "first" one should be connected to the router (with the included network patch cable) and plugged into the nearest power outlet. The second/next adapter is to be connected via its patch cable to the computer in the second/next room and plugged into the nearby power outlet. The maximum length of the electrical wires between the outermost points of the network cannot exceed 300 m. All outlets should use the same branch (phase) of the power network.
Specifications:
| Software specifications | |
| Standards | HomePlug AV 200 Mbps, IEEE 802.3 10/100 Ethernet |
| Modulation | OFDM |
| Protocol | TCP/IP |
| Max data rate [Mbps] | 200 |
| Additional functions | WPS (QSS) |
| 128-bit AES encryption | |
| Hardware specifications | |
| Interface | Ethernet port ( RJ-45) |
| Power plug | EU (or direct connection to the power line) |
| LED indicators | Powerline connection, Power, Etherne, WiFi (one unit) |
| Range (via power line) [m] | up to 300 (in building; no influence of physical obstacles) |
| WiFi | 802.11n (150 Mbps) |
| Antenna gain [dBi] | 2 |
| Certificates | CE, FCC |
| Dimensions (one unit) [mm] | 105x58x40 |
| Weight (one unit) [kg] | 0.17 |
| Working environment | Temperature: 0...40°C Humidity: 10...90% |
| Power consumption (one unit) [W] | <3 |
Specifications
| Specyfikacja systemowa | |
| Standard | HomePlug AV 200 Mb/s IEEE 802.3 10/100Ethernet |
| Modulacja | OFDM |
| Protokół | TCP/IP |
| Prędkość transmisji [Mb/s] | do 200 |
| Dodatkowe funkcje | Przycisk WPS (QSS) |
| Szyfrowanie 128-bit AES | |