Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Discuss in detail the subscriber loop systems.
Subscriber Loop System: Every subscriber in a telephone network is linked usually to the nearest switching office by means of wire's dedicated pair. Subscriber loop seems as to this pair of wires. This is unwidely to run physically independent pairs from each subscriber premises to the exchange. This is far easier to lay cables having a number of pairs of wires for various geographical locations and run single pairs as needed by the subscriber premises.
FIG - Cable Hierarchy For Subscriber Loops.
MDF = main distribution frame; MF = main feeder; FP = feeder point; BF = branch feeder; DW = drop wires; DP = distribution point; DC = distribution cable
Usually four levels of cabling are used as demonstrated in figure. At the subscriber ending, the drop wires are obtained to a distribution point. The drop wires are the single pairs which run into the subscriber premises. The drop wires are associated to wire pairs in the distribution cables, at the distribution point. Several distribution cables from nearby geographical locations are terminated on a feeder point where they are linked to branch feeder cables that, in turn, are linked to the main feeder cable. This main feeder cables carry a larger number of wire pairs, classically 100 to 2000, than the distribution cables that carry typically 10-500 pairs. These feeder cables are terminated on a main distribution frame (MDF) at the exchange. The subscriber cable pairs emanating by the exchange are also terminated at the MDF.
There are various limitations of primary memory like limited capacity which is its not enough to store a very large volume of data and volatility which is when power is turned off
Yes, single thread module
Q. Define Public Identifiers? Public Identifiers: A public identifier is one which is defined within one module of a program however potentially accessible by all of the other
output devices used in virtual rality
Types of Pipelines: Instructional pipeline It is used where different stages of an instruction fetch and execution take place in a pipeline. Arithmetic pipeline
Q. What is Block size of cache memory? Block Size: Block size means unit of data (few memory words) exchanged between main and cache memory. As block size increases from very
You can't plan only for the present phase of the project as your future activities are still coarse granular. To have good planning you require to have fine granularity w.r.t the t
What are the advantages of code optimization? Code optimization tends at enhancing the execution efficiency of a program. It is achieved in two manners. Redundancies in a progr
Q. What is Video Card Interfaces? A video interface is the link of video system to rest of the PC. To improve video performance there is required to be an intimate connection betw
Multiple Instruction and Single Data stream (MISD): In this type of organization multiple processing elements are ordered under the control of multiple control units. Every contro
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd