SYLAB
CSBox-Tube
Carbon and Sulfur Determinator
-
Coal
-
Rocks
-
Cement
-
Soils
-
Feed
-
Biomas
-
Ores
-
Coke
-
Wastes
MEASURING RANGE
C: 0.005 to 100 % using 1g to 40mg Sample
S: 0.005 to 100 % using 1g to 40mg Sample
ACCURACY : +-1% relative (most samples)
SENSITIVITY: 1 ppm
ANALYSIS TIME : 120 sec to 3 mn typical
SAMPLE WEIGHT :20 to 2000 mg
Combustion method : 1500/1340°C tube Furnace
Detection method: Infrared
GAS :Oxygen 1 bar- 4 liters/analyse
RUNNING PRINCIPES
A rough sample of the analyzed product (from 10 mg up to 200 mg) is burnt thanks to an oxygen flow or natural air flow with or without tin encapsulation in a tubular furnace (between 1300°C and 1500°C). The combustion gases are freed from dust and dehydrated through moisture absorbers. The gas flow is regulated in real time and the gas is pushed under pressure in the measuring chamber of a IR cell equipped with an interferential filter whose radiation wave band is adapted to the measured element (C02, S02...). The signal is processed, integrated and divided into the initial mass of the product in order to measure the percentage of SULFUR and CARB0N.
SYSTEM OVERVIEW
Samples are accurately weighed on the interfaced electronic balance. The operator can choose between the following included protocols: Sartorius, Adam, Ohaus, Mettler or a manual entry. The sample weight is automatically transfered into the stack area of the memory. The analysis time depends of analyzed Sample (generally between 120 to 360 seconds). The computer is driving the CSbox through a USB port , the software,delivered on a CD, is running under Windows XP, W7, you can use a dedicated computer or your laptop.
