NEC which provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. U.S. Responsible Party: Marantz America, Inc. 100 Corporate Drive, Mahwah, NJ, 07430, U.S.A.
Additional Safety Information! IMPORTANT SAFETY • This product should not be placed in a built-in installation such as a bookcase or rack unless proper INSTRUCTIONS ventilation is provided or the manufacturer’s instructions have been adhered to. • Apparatus shall not be exposed to dripping or splashing and that no objects fi lled with liquids, such as READ BEFORE OPERATING EQUIPMENT vases, shall be placed on the apparatus.
This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the AV8003. As there are a number of connection and confi guration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
CONTROLLING THE ZONE FUNCTION FROM HDMI 1.3a-compatible equipment. REAR PANEL ..............7 VIDEO CONVERT ............40 In addition, Marantz has focused on the future. By ANOTHER ZONE .............67 utilizing pre-out jacks, 7.1 direct inputs and a RS-232C REMOTE CONTROLLER RC2001 ........8 CONPONENT I/P .............41 REMOTE CONTROLLER OPERATION ..69...
HDMI Ver. 1.3a. • Set Up Menu via all Video Output especially the top panel. Contact with hot areas can AV8003 can be powered by 120V AC only. Copyright Protection (Composite, S-Video, Component video and cause burns.
ENGLISH LOADING BATTERIES Rechargeable batteries can also be used. In this CAUTIONS ON BATTERIES OPERATION OF REMOTE CONTROLLER case, be sure to use only AAA type NiMH (Nickel Before using the remote controller for the fi rst time, • Use “AAA” type batteries in this remote controller. Metal Hydride) rechargeable batteries.
MENU. Automatically measure speaker characteristics using the included microphone. (See page 27) BAND button AV PRE TUNER AV8003 AV PRE TUNER AV8003 Press this button to switch between FM, AM, XM (XM THX button Ready) and SIRIUS (SIRIUS Ready) in the TUNER Press this button to select THX processing for input mode.
ENGLISH FL DISPLAY AND INDICATER This indicator is illuminated when the input signal is PCM (pulse code modulation). k l ¡1 ¡3 2 SURROUND ¡0 ¡2 ¡4 This indicator is illuminated when a Dolby Surround signal is input. SURROUND DISP MULTI AUTO TUNED...
CD/CDR ZONE OUT ZONE OUT MODEL NO. AV8003 MODEL NO. AV8003 D o n o t c o n n e c t t o t h e B A L A N C E D a n d Connect this jack to the line level input of a powered 7.1CH...
Marantz dealer. that have been set with separately powered on and controller. The POWER button, numeric buttons and OUT: Connect to the Marantz component equipped off remote commands. control buttons are used in common across different with remote control (RC-5) terminals in Multi input source components.
(When Zone D (MAIN ZONE) mode is selected) ZONE button infrared receptor of Marantz products in multiple These buttons are used to turn on or off, for the unit These buttons are used to mute the audio for the unit This button is used to set the zone area.
ENGLISH HEIGHT OF THE SPEAKER UNITS CONNECTIONS Subwoofer Surround Right Front left and right speakers, and a center speaker Surround Back Right Align the tweeters and mid-range drivers on the Front Right SPEAKER PLACEMENT three front speakers at the same height, as best as possible.
ZONE OUT ZONE OUT VCR1 VCR1 DSS/VCR2 DSS/VCR2 TAPE TAPE CD/CDR CD/CDR ZONE OUT ZONE OUT MODEL NO. AV8003 MODEL NO. AV8003 MODEL NO. AV8003 MODEL NO. AV8003 7.1CH 7.1CH 7.1CH 7.1CH AUDIO AUDIO ( ( AUX AUX) ) AUDIO...
ENGLISH ABOUT BALANCED JACKS CONNECTING AUDIO COMPONENTS • The balanced output connector uses a XLR CD recorder Super Audio CD connector. Analog Audio • The XLR connector for professional use is internally Analog Audio (balanced) wired in either of the following two systems. ANALOG ANALOG 1.
VCR1 VCR1 DSS/VCR2 DSS/VCR2 TAPE TAPE CD/CDR CD/CDR ZONE OUT ZONE OUT MODEL NO. AV8003 7.1CH 7.1CH necessary to connect the conventional video signal to 7.1CH 7.1CH the VIDEO (composite) jack. If you use both video AUDIO AUDIO AUDIO AUDIO...
CD/CDR ZONE OUT ZONE OUT HDMI 1.2 or later is connected to the unit, DSD format. MODEL NO. AV8003 MODEL NO. AV8003 playback is not possible even with Super Audio 7.1CH 7.1CH • Refer to the instruction manual of the TV or display...
Therefore you need to aim the remote button on the front panel at the same time for control only at the unit. Also, if a Marantz power fi ve seconds. amplifi er (some models excluded) is connected to The setting “IR=ENABLE”...
VCR1 VCR1 DSS/VCR2 DSS/VCR2 TAPE TAPE CD/CDR CD/CDR ZONE OUT ZONE OUT MODEL NO. AV8003 MODEL NO. AV8003 7.1CH 7.1CH Insert the bare wire into the antenna terminal. Release the lever. ( ( AUX AUX) ) AUDIO AUDIO Note: •...
PUSH PUSH COLD(-) RECEIVER AC IN AC IN UNBALANCED UNBALANCED BALANCED BALANCED EMITTER EMITTER SELECTOR SELECTOR ZONE OUT MODEL NO. AV8003 MODEL NO. AV8003 7.1CH 7.1CH ( ( AUX AUX) ) NORTH NORTH Antenna WEST WEST EAST EAST SOUTH SOUTH...
CONNECTING FOR THE ZONE As shown in the diagram, a player connected to this unit in another ZONE can be used to play music and movies when used in combination with an amp from Marantz or other manufacturer. If Surround back speakers or SPEAKER C are not being used, the Surround Back Preout terminals can be used for the ZONE SPEAKER terminals.
ZONE VCR1 VCR1 DSS/VCR2 DSS/VCR2 TAPE TAPE CD/CDR CD/CDR ZONE OUT ZONE OUT MODEL NO. MM8003 MODEL NO. MM8003 MODEL NO. AV8003 MODEL NO. AV8003 7.1CH 7.1CH AUDIO AUDIO ( ( AUX AUX) ) ON OFF RIGHT LEFT SPEAKER SPEAKER...
MAIN MAIN ZONE ZONE SELECTOR SELECTOR DSS/VCR2 S/VCR2 TAPE TAPE CD/CDR CD/CDR ZONE OUT ZONE OUT MODEL NO. A MODEL NO. AV8003 Router 7.1CH 7.1CH Modem AUDIO AUDIO ( ( AUX AUX) ) CONNECTION HOT(+) COLD(-) NETWORK NETWORK NETWORK NETWORK...
There are 7 items in the MAIN MENU. Select the desired sub-menu with the 3 or 4 cursor buttons and press the ENTER button. AV8003 FRONT BUTTON CONTROL The display will change to the selected sub- menu. Notes: UP button •...
Page 25
ENGLISH Note: • After you complete this portion of the setup, move cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the ENTER button. SUB MENU • Press the TOP button on this unit to return to the top MAIN MENU screen of the main menu while setting setup items.
ENGLISH 1 . I N P U T S E T U P 1 INPUT SETUP F U N C I N P U T S E T U P This menu is for setting the matching the output of 7 .
Page 27
ENGLISH 1-1 FUNC INPUT SETUP COMP 1-2 7.1 CH INPUT SETUP Select desired channel with the 3 or 4 cursor Assign the number of a component video input (ASSIGNABLE DIGITAL INPUT) buttons. This menu is for adjusting the speaker levels for 7.1- jack to the device.
Page 28
ENGLISH 1-3 FUNCTION RENAME Repeat steps 5-8 until the new name is input. Input sources can be registered under any name. This menu is for renaming input source. BACK: This menu is for renaming function name. Names Deletes the character left of the cursor in the can be up to 10 characters long, including spaces.
ENGLISH 2 . S P K R S E T U P 2 SPKR (SPEAKER) SETUP A U T O S E T U P M A N U A L S E T U P After you have installed the unit connected all the components and determined the speaker layout, it T H X A U D I O...
Page 30
19, 36.) A U T O S E T U P between the main listening position and AV PRE TUNER AV8003 AV PRE TUNER AV8003 Select “START” with the 3/4 cursor buttons S P E A K E R S C H E C K : O K surrounding positions.
Page 31
ENGLISH Note: [Example] Confi rmation screen for speaker size and Note: crossover frequency • Less than 6 positions can be measured, but it is Pressing “EXIT” prior to pressing “STORE” erases all recommended to measure in all 6 positions in order measurement results and calculation results, therefore S P E A K E R S I Z E...
ENGLISH ERROR MESSAGES Displayed Error Cause How to Remedy MIC SET ERROR!! • The microphone is not properly connected. • Connect the included microphone. • Check the microphone connection. A U T O S E T U P A U T O S E T U P : S T A R T M A I N...
Page 33
If you are unsure, have This setting has effect only during playback of your Marantz dealer perform the installation for you. SMALL: SURR. They are trained professionals familiar with even PCM or analog stereo sources.
Page 34
ENGLISH SUB W: TEST MODE: 2-3 THX AUDIO SETUP Speaker type and positioning Set the distance from the subwoofer to your Select “MANUAL” or “AUTO” generation of the test This diagram shows the desired positioning for 7.1 You can set the advanced Speaker Array. tone with the 1 or 2 cursor buttons.
ENGLISH 3 . S U R R S E T U P 3-1 CHANNEL LEVEL 3 SURROUND SETUP C H A N N E L L E V E L Select “3. SURR SETUP” from MAIN MENU M U S I C P A R A M E T E R This menu is for setting surround effect parameters P A R A M E T E R...
Page 36
ENGLISH SUB W LEVEL: 3-2 PL x (PRO LOGIC x) MUSIC PARAMETER After you complete this portion of the setup, move 3-4 NEO:6 PARAMETER cursor to “RETURN” with the 3, 4, 1 and 2 cursor Set the effect level of the subwoofer speaker The DTS NEO:6 mode enables a maximum 6.1 Pro LogicIIx-Music mode creates a rich and between –18 and +12 level in 0.5 level interval .
ENGLISH • HDMI OUT ANA ONLY: AUTO: 4 VIDEO SETUP This mode both up-converts and down-converts Sets an appropriate resolution for a television that This setting is for selecting which output terminal, analog video signals (Composite Video, S-Video, is connected using HDMI. Video settings are made as follows.
L E V : - 9 0 d B L E V “TV AUTO” and “RS-232C” are disabled when the MARANTZ power amp other than R E T U R N B A C K E X I T R E T U R N...
Page 39
OSD INFO: 5-2 DC TRIGGER SETUP With this function, on-screen display information is The AV8003 has source selectors, sleep timers and This unit has 2 DC trigger control jacks, which can shown on connected TVs or other devices when zonespeaker output remote controller for the two be used to link with input functions for the main zone you switch input functions.
ENGLISH 6 . A C O U S T I C E Q . 6 ACOUSTIC EQ Select “FRONT”, “FLAT”, “AUDYSSEY”, “PRESET” or “OFF” with the 1 or 2 cursor E Q . M O D E O F F This display is for setting up the equalizer and buttons.
ENGLISH 6-1 PRESET G. EQ ADJ 6-2 CHECK AUTO • SCREEN SAVER: 7 NETWORK SETUP Use the 1 / 2 cursor buttons to select “ON” or “OFF” These modes allow you to set a 9-band graphic These menus are for confirming the results of for the screen saver from the video signal that is These settings relate to playing music, photos, and equalizer for each of the 7 channels.
(Using the unit) entered during the confi guration process for that lower level than usual. ≠ source. AV PRE TUNER AV8003 • When a video source is selected, the selected PURE DIRECT PURE DIRECT HDMI video signal is output from the MONITOR OUT...
Note that the SLEEP indicator on the display will The up-conversion feature of this unit can output • The tone control function is unavailable for the AV PRE TUNER AV8003 illuminate when the Sleep function is programmed. the input analog video signals (for component video...
The available surround modes may be restricted depending on the input signal and speaker setup. Notes of OSD menu system: MONITOR OUT terminal of the unit • The setup menu can be displayed through all AV PRE TUNER AV8003 AV PRE TUNER AV8003 PURE DIRECT PURE DIRECT...
Page 45
ENGLISH Output Channel Front information display Output Channel Front information display Surround Mode Input Signal Decoding Surround Mode Input Signal Decoding SubW Signal format indicators Channel status SubW Signal format indicators Channel status 2 DIGITAL EX DOLBY Dolby Surr.EX Dolby Digital EX L, C, R, SL, SR, S, LFE Multi Ch.
Page 46
ENGLISH AUTO EX/ES Dolby MODE When this mode is selected, the unit determines This mode provides 6.1 channel surround for Dolby dts, Neo:6 Cinema, Neo:6 Music (Dolby Digital, Pro Logic IIx MOVIE, Pro Logic IIx whether the digital input signal is Dolby Digital, Digital EX, and DTS-ES-encoded source material This mode is for DTS-encoded source materials MUSIC, Pro Logic IIx GAME)
Page 47
ENGLISH STEREO THX Surround EX will operate for any 5.1 channel THX GAMES CAUTION source whenever THX is active. This mode bypasses all surround processing. For the replay of stereo and multichannel game Note for DTS THX Surround EX is not available in system without In stereo program sources, the left and right channels audio the THX Games mode should be selected.
DISP DISPLAY CD/CDR OUT, VCR1 OUT, and DSS/VCR2 OUT in the record mode. AV PRE TUN AV PRE TUNER AV8003 AV PRE TUNER AV8003 AV PRE TUNER AV8003 PURE DIRECT PURE DIRECT M-DAX...
+12 dB. is activated. The signal-input level is reduced by BYPASS → DH (DOLBY Headphone) → BYPASS AV PRE TUNER AV8003 AV PRE T AV PRE TUNER AV8003 about half. Attenuation will not work with the output These adjustments result will be stored to 7.1...
“LIP.SYNC” and 1 and 2 cursor Set up the unit in the state for which you want to AV PRE TUNER AV8003 VIDEO in terminal. Be sure to connect the store the settings. Hold the MEMORY and ENTER buttons of the remote controller.
Recover backed up settings as follows. AUTO TUNING Hold the MEMORY and MENU buttons on the front TO SELECTING THE TUNER panel simultaneously for at least 3 seconds. (Using the unit) AV PRE TUNER AV8003 AV PRE TUNER AV8003 PURE DIRECT URE DIRECT HDMI HDMI...
Analog / Digital Auto Mode 2. 4. 1. 3. T - M O D E : D I G - A T AV PRE TUNER AV8003 AV PRE TUNER AV8003 For listening to HD Radio stations. PURE DIRECT...
Page 53
You can fast forward the preset stations, press The list display will disappear automatically in 5 the 2 cursor button continuously. AV PRE TUNER AV8003 AV PRE TUNER AV8003 seconds. When the desired preset station is received,...
Page 54
This function allows the name of each preset channel the MEMORY button on the remote controller. to be entered using alphanumeric characters. AV PRE TUNER AV8003 AV PRE TUNER AV8003 Before name inputting, you need to store preset The entry in this column is fi xed and the next...
AM and FM radio stations, with Use this mode when listening to HD Radio stations. improved sound quality, better reception, and new (It is recommended that you normally use this AV PRE TUNER AV8003 AV PRE TUNER AV8003 data services. mode.)
Page 56
• The HD Radio signal strength of the FL display channels.) changes as shown below according to the receiving condition. AV PRE TUNER AV8003 AV PRE TUNER AV8003 HD SIG: ■ ■■ ■ ■ ■ When the Text 1 (Artist name) is displayed:...
ENGLISH Example: PTY AUTO SEARCH Notes: RBDS OPERATION When two multicast channels are broadcast by an When the unit receives the RDBS text data from a You can use the Program Type information search HD Radio station at 100.10 MHz RBDS (Radio Broadcast Data System) is a description station, the station name is displayed.
XM service. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, R & B Rhythm and Blues manipulate or otherwise make available any technology or software incorporated in receivers compatible with AV PRE TUNER AV8003 AV PRE TUNER AV8003 SOFT R&B Soft Rhythm and Blues the XM satellite Radio System.
Before you can listen to XM Satellite Radio, you must currently selected in the front panel display. fi rst select the input source on the unit. AV PRE TUNER AV8003 AV PRE TUNER AV8003 AV PRE TUNER AV8003 PURE DIRECT...
You can search for the channel you want to listen to using one of three search modes. You can also enter the number directly to select the desired channel. AV PRE TUNER AV8003 AV PRE TUNER AV8003 P i n k...
Category being aired can be only selected. (You can preset 50 XM Radio stations in addition to ”- -” (preset number) starts blinking on the FM/AM stations.) dispIay. AV PRE TUNER AV8003 AV PRE TUNER AV8003 2. 4. PURE DIRECT PURE DIRECT...
Page 62
You can remove preset stations from the memory When the XM Satellite Radio broadcast received display. using the following procedure. supports XM HD Surround Sound, Surround playback is possible in Neural Surround mode. AV PRE TUNER AV8003 AV PRE TUNER AV8003 PURE DIRECT DIRECT HDMI HDMI...
INTRODUCING SIRIUS SATELLITE RADIO Simply The Best Radio on Radio™ with all your favorite entertainment including • 100% COMMERCIAL-FREE MUSIC– All kinds of music, no commercials AV PRE TUNER AV8003 ® • LIVE SPORTS COVERAGE & EXPERT TALK– NFL, NASCAR...
Page 64
P i n k F l o i d panel display. F l o i d M o n e y AV PRE TUNER AV8003 AV PRE TUNER AV8003 PURE DIRECT PURE DIRECT H H DMI M-DAX...
You can also enter Category being aired can be only selected. the number directly to select the desired channel. AV PRE TUNER AV8003 AV PRE TUNER AV8003 PURE DIRECT RECT...
(You can preset 50 SIRIUS Radio stations in addition memory location. to FM/AM stations.) (Using the remote controller) 2. 4. Tune into the desired channel. AV PRE TUNER AV8003 AV PRE TUNER AV8003 Press the < / > button until 002 is displayed. PURE DIRECT HDMI HDMI...
(4 digits), then SETTING/RELEASING PARENTAL LOCK press the ENTER button on the main unit or the AV PRE TUNER AV8003 AV PRE TUNER AV8003 remote controller. PURE DIRECT PURE DIRECT...
Page 68
P-LOCK button on the remote controller. the P-LOCK button on the remote controller. When [PASSWORD ****] appears, use the AV PRE TUNER AV8003 AV PRE TUNER AV8003 When [PASSWORD ****] appears, use the cursor buttons on the main unit or remote...
B” in the SPEAKER SETUP menu. (See SPEAKER area for Iistening to music. SETUP, page 30) AV PRE TUNER AV8003 AV PRE TUNER AV8003 To use the zone system, connect the audio from the • “The Surr. Back Speakers are in use” is displayed...
ZONE, even from a ZONE not set for this unit, by twice. The backlight lights. ZONE Speakers can be controlled on the fi rst page connecting a MARANTZ product with external IR of the remote controller. POWER ON/OFF receiver or infrared receiver using the RC2001 or Press the ZONE A button.
Page 71
ENGLISH OSD INFORMATION DISPLAY ON THE ZONE MONITOR The setting status of ZONE A can be displayed on a TV monitor connected to the video output for ZONE (ZONE OUT) terminals. <RC2001> Switch the remote controller to ZONE-A mode. Press the INFO button. <RC101>...
Soft button Refer to the list of soft buttons in the table below. Turn on the AV8003. = Turn on the TV. = Turn on the DVD. = Set the TV function to DVD. = Set the AMP < / >...
Page 73
ENGLISH AMP MODE List of Soft buttons SOURCE ON/OFF Turn the AV8003 on and off Page Command Note Page Command Note POWER ON Turn the AV8003 on M-DAX M-DAX ON/OFF Select DVD function POWER OFF Turn the AV8003 off SLEEP...
Page 74
ENGLISH NETWORK MODE TUNER MODE Soft button Refer to the list of soft buttons in the table below. Soft button Refer to the list of soft buttons in the table below. HOME Switch the remote controller to HOME mode. HOME Switch the remote controller to HOME mode.
ENGLISH CONTROLLING MARANTZ COMPONENTS Note: • Not all commands are necessarily supported by each source component. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) List of Soft buttons Page Command Note SOURCE ON/OFF Turns the DVD player on and off 1.DVD...
Page 76
ENGLISH CONTROLLING A DSS (DSS MODE) CONTROLLING A MARANTZ CD PLAYER (CD MODE) SOURCE ON/OFF Turns the DSS on and off SOURCE ON/OFF Turns the CD player on and off Soft button Refer to the list of soft buttons in the table below.
Page 77
ENGLISH CONTROLLING A MARANTZ UNIVERSAL DOCK (AUX MODE / IPOD MODE) CONTROLLING A MARANTZ VCR (VCR1 MODE) SOURCE ON/OFF Turns the UNIVERSAL DOCK (Dock connector) ON and OFF SOURCE ON/OFF Turns the VCR on and off Soft button Refer to the list of soft buttons in the table below.
Page 78
ENGLISH CONTROLLING A MARANTZ TV (TV MODE) List of Soft buttons SOURCE ON/OFF Turns the TV on and off Page Command Note POWER ON Turns the TV on 8.TV SELECT TV function POWER OFF Turns the TV off MEMO Starts program Soft button Refer to the list of soft buttons in the table below.
Page 79
ENGLISH CONTROLLING A MARANTZ TAPE DECK (TAPE MODE) CONTROLLING A MARANTZ VCR (VCR2 MODE) SOURCE ON/OFF Turns the TAPE deck on and off SOURCE ON/OFF Turns the VCR on and off POWER ON Turns the TAPE deck on Soft button Refer to the list of soft buttons in the table below.
Page 80
ENGLISH CONTROLLING A MARANTZ PLASMA (PLASMA MODE) List of Soft buttons POWER ON Turns the PLASMA on Page Command Note POWER OFF Turns the PLASMA off PLASMA Select TV function Soft button Refer to the list of soft buttons in the table below.
Page 81
ENGLISH CONTROLLING A MARANTZ CD-R (CD-R MODE) CONTROLLING A MARANTZ MD DECK (MD MODE) SOURCE ON/OFF Turns the CD recorder on and off SOURCE ON/OFF Turns the MD deck on and off POWER ON Turns the CD recorder on POWER ON...
Page 82
ENGLISH CONTROLLING A MARANTZ BLU-RAY PLAYER (BLU-RAY MODE) POWER ON Turns the Blu-ray player on POWER OFF Turns the Blu-ray player off Soft button Refer to the list of soft buttons in the table below. HOME Switch the remote controller to HOME mode.
ENGLISH CONTROLLING ZONES USING THE RC2001 The supplied RC2001 remote controller can be used for Zones. To use the remote controller for Zones, be sure to switch it to ZONE-A or ZONE-B mode. ZONE A (ZONE-A MODE) List of Soft buttons SOURCE ON/OFF Turn the ZONE A on and off POWER ON...
Page 84
ENGLISH ZONE B (ZONE-B MODE) List of Soft buttons SOURCE ON/OFF Turn the ZONE B on and off POWER ON Turn the ZONE B on Page Command Note POWER OFF Turn the ZONE B off ZONE-B Soft button Refer to the list of soft buttons in the table below. Z.SPK-ON Turn on ZONE SPEAKER B HOME...
• The setting is made using the Wizz.it 3 editor, and The Wizz.it 3 editor software can be used to make receiver on the Marantz remote controller at a the buttons that are assigned to the sleep timer are the settings for the IR Command, LINK, JUMP, One distance of about 2 inchs (5 cm).
Page 86
ENGLISH • The RC2001 can learn up to a maximum of 1,000 This screen changes to HOME mode. Press This enters the learning standby mode. remote controller codes. Once 1,000 codes are the button next to the displayed device name Press the remote controller button that you programmed for learning, “LEARNFULL”...
Page 87
ENGLISH 2. TIMER Operation Settings Home mode is shown in the LCD. Select the Press a button next to the “EVERYDAY” or Press the button next to the “TIMER SET” commands and devices for the commands that “ONE TIME” indicators on the LCD to set timer The timer function of the RC2001 can be used indicator in the LCD in the TIMER menu will be sent by timer programming.
Page 88
ENGLISH Operation ON/OFF Settings • Either press the ENTER button or wait three seconds for the LCD to automatically return Press the button next to the “ON/OFF” indicator to the MAIN menu. in the TIMER menu screen on the LCD to display the timer operation ON/OFF setting •...
Page 89
ENGLISH 3. SYS.SETUP BACK LIGHT (Backlight illumination time setting) Use the numeric buttons (0 to 9) and cursor The message “COMPLETED” is displayed on Press the LIGHT button on the RC2001 to turn on buttons (t and u) to set the current time. After the LCD to indicate that the illumination time Display the MAIN MENU on the LCD of the RC2001, the backlight, then set the time until the backlight...
Page 90
ENGLISH LCD (LCD setting) • CONTRAST BEEP (Beep sound setting) The message “COMPLETED” is displayed on Press the button next to the “LCD” indicator in the (LCD CONTRAST ADJUSTMENT) This sets the built-in beep sound in the RC2001. the LCD to indicate that the display time setting SYS.SETUP menu screen in the LCD.
Page 91
• BEEP signals include the learned codes for up to 8000 codes. This number is for Marantz remote control codes. The actual number of codes may be less than 8000 depending on the type of the programmed remote control signals.
The included remote controller can be used in zone systems. Using this remote controller, you can operate the Press the desired SOURCE button. unit through infrared receivers or the infrared receptor of Marantz products in multiple ZONEs. Press the desired operation buttons to play the selected component.
Page 93
ENGLISH CONTROLLING A MARANTZ DVD PLAYER (DVD) CONTROLLING A MARANTZ VCR DECK (VCR1/ C O N T R O L L I N G A M A R A N T Z S AT E L L I T E...
Page 94
ENGLISH CONTROLLING A MARANTZ CD PLAYER (CD) CONTROLLING A MARANTZ CD RECORDER (CDR) CONTROLLONG A MARANTZ TAPE DECK (TAPE) CONTROLLING A MARANTZ UNIVERSAL DOCK (AUX1) • (*) RC101 dose not have the PRESET code library • RC101 dose not have the PRESET code library for •...
• The preset codes do not cover full functions. This remote controller is preset with a total of If you need extra function, use LEARN mode to 12 types of remote codes, including Marantz TV store extra function. CHECKING THE CODE (television), DVD, VCR (VCR deck), DSS (satellite •...
Page 96
SEND indicator signal transmitter is facing the infrared signal blinks twice. receiver on the Marantz remote controller at a • When the SEND indicator blinks once, distance of about 2 inchs (5 cm). repeat this step.
ENGLISH CLONE MODE CHANGE THE CONTROL COMMANDS OF ZONE OTHER OPERATIONS Press the ENTER cursor button on the receiving SPEAKER FUNCTION FROM ZONE. remote controller. Creating copies using clone mode CHANGE THE ZONE CONTROL COMMANDS FOR All of the codes programmed to the RC101 remote EACH ZONE controller can be copied to another RC101 using a few simple operations.
If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the analog input signal. internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz Can not select CSII mode.
ENGLISH HDMI XM SATELLITE RADIO If a problem should arise, fi rst check the following. SYMPTOM CAUSE REMEDY 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? The display does not appear The connected monitor or projector does A video signal is not output except when using an 3.
Page 102
ENGLISH AUTO ZONE EXIT TOP PROTECTIVE FEATURE In some cases, the STANDBY indicator may AV PRE TUNER AV8003 AV PRE TUNER AV8003 blink slowly, twice per second. In this case, turn PURE DIRECT PURE DIRECT HDMI HDMI off the unit, unplug the power cord, and check the...
This product is manufactured under license from This is because they were originally mixed for a small Neural Audio Corporation and THX Ltd. Marantz A.S.A. (Advanced Speaker Array) room environment. hereby grants the user a non-exclusive, non- “ASA”...
Page 105
ENGLISH Now, every moviegoer can hear the sound exactly as • dts Digital Surround 96/24 Manufactured under license under U.S. Patent Dolby Digital EX creates six full-bandwidth output The stereo CD is a 16-bit medium with sampling at #’s: 5,451,942; 5,956,674; 5,974,380;5,978,762; channels from 5.1-channel sources.
Page 106
ENGLISH Dolby Virtual Speaker retains all the original original programming to more closely achieve low surfaces and standing waves that are created between large parallel surfaces in the room. In a home theater Multichannel audio information and provides the frequencies–overcoming the low frequency limitations the situation is further complicated because there are listener with the sensation of being surrounded by of the speakers by full octave.
Page 107
You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in China 04/2008 541110070025M mzh-d...