Advertisement
Quick Links
Quick Start Guide
Accessories
Power cords
68-pin HD to HD
cable and LVD
terminator*
* LVD SCSI confi guration only.
Active SCSI terminator. The Magnum 224 Library ships from the factory with these accessories.
** To prepare your own labels, refer to the Tandberg Data Bar Code Label Specifi cation for LTO Cartridges available at: www.Tandberg Data.com
Additional Items
Host computer with
adapter card installed
Hybrid cable
Fibre Channel cable
Power cord (for use
outside the US, Canada,
or Europe)
Backup software
Data and Cleaning
cartridges (available
from Tandberg Data or
your supplier)
WARNING! The library weighs 44 lbs (20 kg). Two people are needed to move or lift the library. Most of the weight is toward the back of the library.
WARNUNG! Die Library wiegt 20 kg. Es sind mindestens 2 Personen erforderlich, um die Library zu bewegen oder zu heben. Der hintere Teil der
Library hat das Größte Gewicht.
¡PRECAUCIÓN! La biblioteca montada sobre bastidor pesa 20 kg. Se necesitan dos personas para mover o levantar la biblioteca. La parte trasera
de la biblioteca es la de mayor peso.
— These accessories are included with your library
LVD SCSI
Ethernet cable
Important:
Both LTO-2 and LTO-3 tape drives require Ultra 160 rated SCSI cabling, and an Ultra 3 or LVD 160
— You must have -or- obtain some or all the following items to complete the installation
You need a host computer with a host bus adapter card installed. Refer to the
documentation that came with the computer and LVD SCSI or Fibre Channel (FC) adapter
card. The Magnum 224 library is confi gured for LVD SCSI or Fibre Channel.
Important:
Both LTO-2 and LTO-3 tape drives are Ultra 160 SCSI devices and require a
minimum Ultra 160 non-RAID SCSI host bus adapter card (LVD SCSI confi guration only).
If your SCSI controller has a 68-pin
VHDCI connector, you will need to
obtain a VHDCI-to-HD SCSI cable.
If you have a Fibre Channel adapter card installed, you need to obtain a FC cable.
If you plan to use the library outside these locations, you must supply your own power
cord (see the Product Manual at www.Tandberg Data.com for information about an
International 220 VAC power cord).
You need a backup software application to manage your backup operations. Refer to
the documentation that came with the backup software and make sure it supports the
library. See www.Tandberg Data.com for compatibility information.
Tape
Ultrium 3
Drive
Read
LTO-3
Yes
LTO-2
No
Product CD
(slate blue)
Ultrium 2
(purple)
Write
Read
Write
Yes
Yes
Yes
No
Yes
Yes
Page 1 of 6
Rack-mount kit
Bar code labels**
(fasteners and
Multi-language
instructions
included)
HD Connector
VHDCI Connector
Ultrium 1
(black)
LTO Ultrium
Read
Write
Cleaning Cartridge
Yes
No
Yes
Yes
Yes
Yes
packet and
Warranty
Advertisement
Related Manuals for Tandberg Data Storage Library T24
Summary of Contents for Tandberg Data Storage Library T24
- Page 1 Both LTO-2 and LTO-3 tape drives require Ultra 160 rated SCSI cabling, and an Ultra 3 or LVD 160 Active SCSI terminator. The Magnum 224 Library ships from the factory with these accessories. ** To prepare your own labels, refer to the Tandberg Data Bar Code Label Specifi cation for LTO Cartridges available at: www.Tandberg Data.com Additional Items —...
- Page 2 Quick Start Guide Step 1 — Before you begin 1 — Ensure that you have all the required items before you proceed (see Accessories and Additional Items on page 1). 2 — Locate an appropriate area for the unit that has adequate clearance for ventilation, minimal dust and debris, and an appropriate power source.
- Page 3 Preparing for and Performing a Backup Congratulations! You have successfully installed your new library! We recommend that you follow these steps: 1 — Read Tandberg Data’s Basic Backup Guide, which is available at: www.Tandberg Data.com. 2 — Select and install a backup application. Software compatibility information is available at: www.Tandberg Data.com.
-
Page 4: Home Screen Menu
Quick Start Guide Home Screen Menu and Buttons ���� ��� ���� Home Screen Exterior Buttons Function Buttons Function ������ ������� ��� ���� Accept the change I/E Port Unlock I/E Port Select Accept the choice Magazine Unlock magazine Back Return to previous screen ����... -
Page 5: Troubleshooting Tips
Confi guration) matches the tape drive(s) installed.** • Driver installation—Some applications provide their own drivers, some do not, and some require installation of the Tandberg Data provided drivers. Refer to the documentation for your backup application and Tandberg Data Knowledge base item #2003 (www.Tandberg Data.com) for more information. -
Page 6: Additional Information
Quick Start Guide Additional Information www.tandberg.com IMPORTANT! Before moving or shipping the library, you must fi rst “Park the Robot” and replace the shipping key or you will void your warranty. • From the library’s front panel, press the Maint / Library Maintenance / Park the Robot buttons.