Table of Contents
Advertisement
Settings
Note
• For details on setting up repeaters, please follow the repeater user manual.
• You can activate either the repeater mode or the ECO Mode.
If you active both features, a conflict message will appear.
ECO Mode
Multi Handset Low Radiation Mode
Electromagnetic radiation is shut down between the base station and all declared hand-
sets. Handsets and base station are waiting for a wake-up signal either in form of an
incoming call, when activating a handset or when the system synchronises data.
When ECO Mode is set to ON, and as long as you are not conducting a conversation,
ECO MODE
is displayed instead of the handset name and the range symbol is depicted in
dotted lines. ECO Mode is activated after every use as soon as you replace the handset
in the base station.
After inactivity of about one minute, and without placing the handset(s) in the base sta-
tion or in the charging bay, the ECO Mode is reactivated automatically.
Radiation reduction in communication
65% radiation reduction on the handset is achieved when it is near the base station.
The handset's power transmission is regulated; the power transmitted from the handset is
automatically reduced to the lower level, depending on the distance to the base station.
This feature is activated when ECO Mode is set to ON.
Press the softkey under MENU. Press
1.
and press OK to confirm.
Switch ECO Mode on or off.
2.
Note
• Default setting on delivery: ECO Mode activated.
• Other cordless DECT products in range may interfere with the ECO Mode.
• You can activate either the ECO Mode or the repeater mode.
If you active both features, a conflict message will appear.
ECO MODE
to scroll to
53
SETTINGS
in the
menu
Advertisement
Table of Contents
