Led Definitions - Motorola Symbol DS6878 Product Reference Manual
Hide thumbs
Also See for Symbol DS6878:
- Product reference manual (629 pages) ,
- Reference manual (510 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Standard Beeper Definitions (Continued)
Table 2-1
Beeper Sequence
Host Specific
USB only
Four high beeps
Digital scanner gives a power-up beep after
scanning a USB Device Type.
This power-up beep occurs more than once.
RS-232 only
High beep
LED Definitions
In addition to beeper sequences, the digital scanner communicates with the user using a two-color LED display.
Table 2-2
defines LED colors that display during scanning.
Standard Scanner LED Definitions
Table 2-2
LED
Scanning
Green Flash
Red
Charging
Green - Slow Continuous Flash
Green - Fast Continuous Flash
1
A slow continuous flash is estimated at 1 flash per second.
2
A fast continuous flash is estimated at 2 flashes per second.
Digital scanner has not completed initialization. Wait several
seconds and scan again.
Communication with the bus must be established before the digital
scanner can operate at the highest power level.
The USB bus may put the digital scanner in a state where power to
the digital scanner is cycled on and off more than once. This is
normal and usually happens when the host PC cold boots.
A <BEL> character is received and Beep on <BEL> is enabled
(Point-to-Point mode only).
A bar code was successfully decoded.
Transmission error or digital scanner malfunction.
1
Non-critical battery temperature fault. Battery is above or below normal
operating temperature.
If this occurs, do not use the digital scanner and move the digital scanner to a
location within normal operating temperature. The digital scanner can remain in
the cradle while the battery warms or cools to normal operating temperature.
Note: For appropriate charging temperatures, see
Digital scanner is charging.
2
Indication
Indication
Table 3-3 on page
Scanning
2 - 3
3-8.
- Quick Links:
- Configurations
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
