Content p. 2 1.0 Introduction 2.0 Important Information p. 3 p. 4-8 3.0 Your A2B 4.0 Understand your A2B p. 9-14 p. 15-19 5.0 Battery use, storage and disposal p. 20-22 6.0 Important Pre-ride Safety Information 7.0 Maintenance p. 23-28 p.
1.0 Introduction Welcome and congratulations on buying your new A2B Hybrid*, the electric bike that’s taking transport in a whole new direction. Your bike will give you the freedom to go your own way. It’s the new revolutionary way to get to work, pop to the shops or just get some fresh air.
Provides helpful or other important related information. If you have any questions or are not sure about any instructions in this owner manual ask your Ultra Motor dealer or call our Customer Services Department on...
3.0 Your A2B 3.1 Components Saddle (seat) Seat post Seat post clamp Frame Headlight Front mudguard Front wheel/tyre Front wheel rim Quick release 10. Front disc brake and rotor 11. Pedal, crank arm and chain ring 12. Drive chain 13. Derailleur and freewheel 14.
Page 7
owner´s manual 3.1 Components 25. Right brake lever (operates rear brake) 26. Left brake lever (operates front brake) 27. Display 28. Gear shifter 29. Right pedal 30. Left pedal 31. Battery lock...
Page 8
If you change components or add accessories, you different tyre, make sure that it is compatible with your A2B do so at your own risk because Ultra Motor may not have by checking with your Ultra Motor dealer. tested that component or accessory for compatibility, Read, understand and follow the instructions that reliability or safety on your A2B.
Page 9
owner´s manual Inside Leg Height 2.5 cm / 1 inch Clearance Frame Height 3.4 Seat height adjustment 3. The seat post clamp should be secured at 10-12 Nm. The seat height may require adjustment. Ask your Ultra Ensure the seat clamp bolt (seat pillar - seat post) is Motor dealer to adjust it before you ride, however to adjust tightened to 27 Nm.
Page 10
Ensure there is no play in the steering and that the 2. Once loose, align the steering is working smoothly. stem with the front wheel. Should you need further advice to adjust the headset, 3. Once aligned, tighten please contact your Ultra Motor dealer. the bolt B to 17-18.5 Nm.
4.0 Understanding your A2B After having read this section, if you are still unsure, please ask an Ultra Motor dealer to explain any functions or features that you do not understand before your first ride. 4.1 A2B Overview...
Page 12
4.3 Display The A2B is equipped with a daylight sensor, this will A – Battery State-of-Charge enable the backlight to switch on automatically. The sensor Indicator (every symbol has a delay of +/- 3 seconds and will only activate when represents cycling.
Page 13
owner´s manual Calibrating Procedure Pressing the mode button will increase the amount of power assistance. Once at power assistance level 3 – shown by The mounted display must be calibrated after unpacking the 3 symbols on the display (F), if pressed again – no symbols bike or if error code 15 occurs.
Page 14
4.4 Gears To ride faster (on a flat section or a downhill), Your A2B has a rear derailleur controlled by the gear shifter on push up lever B towards the right side of the handlebar. you to up-shift, allowing you to pedal more slowly To shift gears, pedal at a for a given speed, but steady pace and push...
Page 15
owner´s manual 4.6 Luggage Carrier A2B may behave differently, especially when steering or braking the bike. Your A2B equipped with a durable luggage carrier. In case 9. Once you have attached your luggage to the luggage you need to carry luggage or any goods with your A2B, please carrier, please be aware that rear light and reflector may be carefully read the enclosed instructions before using the obscured by your luggage.
Page 16
If you have any questions, or if you feel anything about your A2B is not as it should be, ask your Ultra Motor dealer before • Frequent starts and stops (full power from a standing start you ride again.
owner´s manual 5.0 Battery use, storage and disposal 5.1 The battery & charger Poor storage includes: storing near excessive heat and/or open flames, long term exposure to sunlight. only battery supplied with your A2B Use only the battery charger supplied with this battery. Use battery provided of any other battery charger will void the warranty and may...
Page 18
6. Turn ON the charger using the ON/OFF switch on the charger. Your Ultra Motor dealer should provide a fully charged battery upon delivery of your A2B, should this not be the case, please ensure that prior to its first use, you charge 7.
Page 19
80% of its capacity over at least 500 discharge/recharge cycles. As capacity diminishes, you will notice a gradual drop-off in maximum range capability. When range falls to an unacceptable level, contact your Ultra Motor dealer for a replacement battery.
Page 20
5.4 Attaching and connecting the battery to your A2B 4. Carefully align the battery to the battery rails under the Prior to its first use, charge the battery supplied with your A2B for luggage carrier and attach the at least 12 hours. battery by pushing the battery 1.
Page 21
owner´s manual 5.5 Battery Storage 5.6 Battery Disposal DO NOT dispose of the battery as household Disconnect the battery from the bike and store the battery in waste. Dispose of, or recycle according to local a cool (10º-21ºC, 50º-70ºF), dry place. Avoid exposure to direct authority guidelines or contact our Customer sunlight.
6.0 Important Pre-ride Safety Information Special note for parents or guardians Ensure that you and your A2B are both ready for safe and enjoyable use. UK Law requires that you MUST be at least 14 years old to ALWAYS wear an approved bicycle helmet. If you lend your A2B ride an A2B.
Page 23
Have your A2B checked by an Ultra Motor dealer at LEAST once actuates the front brake. a year. Your safety depends on the roadworthiness of your A2B. Brake Pads. When checking your brakes, it is important to check the full brake system.
Page 24
MODE could result in serious or fatal injury and/or property damage. If you don’t understand any aspect of the assembly, use and care of your A2B, please ask your Ultra Motor dealer.
7.0 Maintenance 7.2 Hub bearings Have your A2B checked by an Ultra Motor dealer at least once a year. Check bearing adjustment periodically by lifting 7.1 Wheels the wheel off the ground and spinning it and try to move the...
Page 26
Damaged or worn tyres should be replaced immediately. as necessary. Take your A2B to an Ultra Motor dealer or a qualified bicycle Should your brake Pads appear to be worn down or your mechanic to repair and/or replace your tyres if necessary.
Page 27
Failure to properly install this quick release front hub may result in the front wheel falling off while you are riding. This could result in serious or fatal injury and/or property damage. If you are uncertain about any aspect of the assembly and adjustment of your A2B, ask your Ultra Motor dealer.
Page 28
Re-installing front wheel 4. Firmly grip the fork with your 1. Position the wheel in the left hand, and push the lever front fork so that the quick over to the closed position release lever located towards the fork, ensuring that on the left side of the it does not protrude so as to front fork.
Page 29
owner´s manual Removing rear wheel 3. Remove the cable retaining clips using an appropriate allen key also located on the underside of the left hand chain stay. 1. Ensure that the power is turned OFF and the battery is removed. 4.
Page 30
A2B to your Ultra Motor dealer and ask for assistance in adjusting the brakes. Improperly adjusted brakes may cause reduced braking performance, leading to an accident that could result in serious or fatal injury and/or property damage.
owner´s manual 8.0 Cleaning Your A2B Rubber and plastic parts will be Never use paint-polishing damaged by caustic or pen- agents on plastic parts. etrating cleaning agents or sol- vents. - After a longish ride, thoroughly clean the A2B Always carry out a brake test and preserve it with a after cleaning and before start- commercially available...
9.0 Trouble Shooting No power? Here are some solutions. If they do not solve your problem ask an Ultra Motor dealer for help. Problem Possible cause(s) Solution A2B does not turn on 1. Dead battery Recharge battery. See 5.2 and 5.3 2.
owner´s manual 10.0 Technical Information Battery management system (BMS) General performance specification • Controls and stops over-charging • Overall Dimensions 17” – 1740 mm x 650 mm x 1100 mm • Controls maximum charge current • Overall Dimensions 19” – 1770 mm x 650 mm x 1100 mm •...
11.0 Warranty & Security Details 2. WARRANTY Ultra Motor Warranty (the “Warranty”) Ultra Motor warrants that on delivery of the A2B to You and for the Time Periods, the Goods shall: Definitions 2.1.1 conform in all material respects with their description subject to 1.1 The following definitions in this clause apply in the Warranty:...
12.0 Disposal We at Ultra Motor, Ltd. support the proper disposal and recycling of our products. Please dispose of your vehicle and associated components at your local recycling facility. Disposal assistance can also be provided through your country’s...
Owner registration Fill return your owner registration card immediately or register online today at www.ultramotor.com so that you may receive important product information in the future. Thank you. Your A2B and certain key components have unique serial num- bers. Record these serial numbers for warranty purposes or in Record this other important information: case your vehicle is ever lost or stolen.