Alphacool Eisbaer Pro ES (Solo) Full CPU Water Block and Pump

The Alphacool Eisbaer Pro ES (Solo) offers a significantly higher cooling surface than the normal Eisbaer. It was specially developed for extremely large CPU DIEs and completely covers processors such as the AMD Threadripper but also the AMD Ryzen CPUs. The Eisbaer Pro has also been designed for the Intel Socket 3647 in order to ensure the best possible cooling performance for the entire CPU. The Eisbaer Pro is a real all-rounder. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.

cooler
The cooler base covers the entire surface of the respective processors. The area of the cooling fins is around 55 x 42mm and surpasses all known processor cores. This ensures that all hotspots of a CPU are flooded with water and optimally cooled. With the included AM4 mount, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4mm thick and are also at an optimal distance of 0.4mm from each other. There are a total of 58 cooling fins on the cooler floor. The base of the cooler is only 3mm thick, which means that the heat can reach the water and dissipate it as quickly as possible.

pump
The Eisbaer Pro ES (Solo) cooler uses the very compact and small DC-LT 2 pump. It offers enough power to integrate other components such as GPU water coolers or radiators into the water cycle.

Usable connections
Connections that are too large mean that the fill port can no longer be used. For this we give the following recommendation:
- up to and including 13/10 without restriction
- 16/10 only in angled version
- connections larger than 16/10 should not be used

Compatibility:
Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189
AMD: TR4 / sTRX4 / SP3 / sWRX8 / AM4 / AM5