2D camera

Jaka Lens 2D

Condition: used, Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Manufacturer: Nord, type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D frequency converter type SK 300E-151-340-B -Speed: 40 rpm i= 34.09 -Power: 0,75 kW / 1375 U/min Cfpl7ey2my -Motor: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Construction: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 -Number: 36 engines available -Price: piece -Total dimensions: 490/180/H320 mm -Weight: 28kg

Condition: used, Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Handover in the current condition as seen -Gear base: See photos for damage -Manufacturer: Nord, type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D frequency converter type SK 300E-151-340-B -Speed: 40 rpm i= 34.09 -Power: 0.75 kW / 1375 rpm Tadqfh -Motor: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Construction: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 -Total dimensions: 480/185/H305 mm -Weight: 28 kg

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives Inigkhp -Manufacturer: Lenze, series 8600 -Type: 8603_E.2D.20 -Input: D 400 -Output: 0-400 V/5.5 A -Dimensions: 330/200/H175 mm -Weight: 6.1 kg

Year of construction: 2013, operating hours: 2,071 h, Condition: as good as new (ex-display), Manufacturer + model&nbsp BT SWE 120 S Atex * EX * Mitrex 2D / Zone 21 Mast 2F2850 Snsiv ID 23021.7904 d Mast 2F2850 Lowered height 2020 mm Lifting height 2850 mm Capacity 1200 kg Year 2013 Hours 2071 hours Capacity 24 v / 300 ah - Bj 2023 - NEW !!! OptionsZEER unieke CONTRA stapelaar EX uitvoering !!* EX * Mitrex !!!!!Systeem = ATEX 94 / 9 / EG Gasgroep = IIIB ( niet geleidende stof ) Type = 2D (&nbsp For in Zone 21 ) Temp klasse = T5 ( 135 *C )Uitgevoerd met - MAST FFL - 2 Delig - VRIJDRAGENDE verstelbare heftruck lepels - GESCHIKT voor alle soorten pallets

Year of construction: 2023, Condition: new, Pipe drilling / slant drilling machine automatic drilling machine TDM100 2D AT - automaticwith two opposite drilling units - minimum quantity lubrication - manual material clamping - automatic feed and automatic pipe turning - max. pipe length 3.000mm - positioning accuracy +/- 0,2mm - power drilling unit 2 x 2,2 kW - manual insertion and removal of material - drilling heads +/- 50° swiveling - manual 360 degree swiveling - motor speed 295 - 2950 rpm - operation via touch panel - 100 positions programmable - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm Bw0m2ap

Condition: new, Datalogic Matrix 200 213-101 / WVGA-FAR-25P-ES Compact 2D Imager, serial no. according to photo, unused in opened original box, 100% working, scope of delivery according to photos Cj37snph9z

Year of construction: 2012, Condition: good (used), screendeck: 1.600 x 5.200 mm PU-meshes E-drive 22 kW semimobile construction with outlet chutes with discharge conveyor Vx29r3

Year of construction: 2023, Condition: new, - Cutting area effective 1050 x 2050 mm - Cutting head 2D - CNC control NUM up to 15 m/min - Z-axis CNC clear height 100mm - Position laser - Control housing control panel V2 incl. control cabinet in basin - Computer with 20" LED monitor and splash-proof keyboard and mouse Gdbixcyth - Waterjet software SmartCut - Waterjet cutting valve - Abrasive cutting head - Abrasive dosing unit CNC with intermediate tank - Abrasiv storage tank 450 kg - Abrasiv Minihopper system pressure tank - Cover hood with viewing window and safety function Subject to changes and errors in technical data and prices. Subject to prior sale Our general terms and conditions apply and can be viewed on our website.

Condition: excellent (used), Functionality: fully functional, The following item is for sale: - Our offer number: 10/128 - Barcode checker Barcode checker - Manufacturer: Axicon - Type:12500 2D Verifier - Serial number: 883-0814-051 - with case - with power supply - without CD - Dimensions: Case WxDxH 430x360x180 mm - weight : 4,2 kg - optical condition according to photos - used - functional - The device comes from a factory closure for the production of cosmetics / household / medical products Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods. Bhnbnqwx

Year of construction: 2013, operating hours: 2,668 h, Condition: as good as new (ex-display), Manufacturer + model&nbsp BT SWE 120 S Atex * EX * Mitrex 2D / Zone 21 Mast 2F2850 ID 23021.7862 d Cunr7vuy Mast 2F2850 Lowered height 2020 mm Lifting height 2850 mm Capacity 1200 kg Year 2013 Hours 2668 hours Capacity 24 v / 300 ah - Bj 2023 - NEW !!! OptionsZEER unieke CONTRA stapelaar EX uitvoering !!* EX * Mitrex !!!!!Systeem = ATEX 94 / 9 / EG Gasgroep = IIIB ( niet geleidende stof ) Type = 2D ( toegestaan in Zone 21 ) Temp klasse = T5 ( 135 *C )Uitgevoerd met - MAST FFL - 2 Delig - VRIJDRAGENDE verstelbare heftruck lepels - GESCHIKT voor alle soorten pallets

Year of construction: 2010, Condition: like new (used), Fladder/brush machine Cefla Brand:Cefla Type:VS/26-2D Serie no:MT2S0010225 Year:2010 Fladder/brush/denibbing machine Cefla for fine sanding, between sanding"denibbing" Macine with 2 working units, pressure roller in rubber, vacuum in feed carpet. Techn info: Working hight 880-950mm Max throughfeed width 1300mm Max workpiece 3-80mm Feedingspeed 4-20m/min Motor feeding carpet 0,75kw Rubber pressure rollers before and after the working unit Motor on working unit 1,1kw (1,5HK) Hwv8qgxnw The fladder/brush/working unit speed adjustable 120-600v/rpm Fladder/brush diameter 180mm Vacuum motor 4kw Power 400 volt, 50 Hz, 3 fas, 7,9 kw Extraction vacuum ventilator 3000m3/h Extraction nozzzle 180mm on each working unit Recommended dust extraction 4000 m3/h Over all size:1910x2850x1700mm (lxwxh) Weight 1870kg Stock no:2001349BXAHED

Year of construction: 2024, Condition: new, Functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Blghfbyanao

Year of construction: 1998, Condition: excellent (used), wire diameter range: 2,0 - 6,0 mm wire feeding length: unlimited bend back clearance: 235 - 1.000 mm Bj702rg7l3q wire feeding speed: up to 80 mtr./min power requirement: 10 kW weight: 4.000 Kg.

Condition: used, G. Bee GmbH Turn actuator with limit switch box and 3-way ball valve, GTE 098 090 06 V17 F + MW14 40 02 + IP2M01 G 2D M12 B01 Model: GTE09809006V17F + MW144002 + IP2M01G2DM12B01 Turn actuator GTE-098/090-06-V17-F Technical data: Control pressure: max.10bar Temperature range: -50°C...+70°C ||2 GD T5 T 100°C SIL2 6 springs Limit switch box IP2M01-G-2D-M12-B01 with Cherry-Mikroschalter Material: PA/PC/A2/TPE/IP67 2xmechanical SPDT, gold contact Voltage range: 250V AC/24V DC, 0.1A Dnjxpx Temperature range: -25°C

Condition: new, Functionality: fully functional, The following item is for sale: - Our offer number: 54/129 - ZnSe Meniscus Lens - Manufacturer:ULO Optics - Type:15ZLF95 ZnSe Meniscus Lens D38.⌀m m FL 95.3mm ET3.⌀mm AR/AR - optical condition according to photos - New ( was only opened for photos) - functional Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Dnxvkt Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: used, Centrifugal water pump -Conveying capacity: 2.9 m³/h -Max. H: 26 mws -Motor power: 3 kW -Speed: 2900 rpm -Pipe connection inlet: DN 63 -Pipe connection outlet: DN 40 -Weight: 45 kg Ewiyufy

Year of construction: 2023, Condition: new, • Cutting head optionally: 2D/TAC12/3D68 • Cutting area effectively 1502 x 3002 mm • CNC control NUM Flexmium 3D up to 40 m/min • Z-axis CNC clear height 300mm • Control housing Premium desk • Computer with 20" LED monitor and splash-proof keyboard and mouse • Waterjet software SmartCut • Waterjet cutting valve • Abrasive cutting head • Abrasive dosing unit CNC with intermediate tank • Abrasiv storage tank 450 kg • Abrasiv Minihopper system pressure tank • Safety system: Triple light barriers incl. 2 mirror columns Special equipment: • Premium/MasterCut guides • Clamping frame left and front incl. eccentric clamps • Heavy duty support for workpieces up to 1000 kg/m² • Position laser • Drill spindle Subject to changes and errors in technical data and prices. Subject to prior sale B0bbtsy9 Our AGB's apply which you can see on our website.

Year of construction: 2000, Condition: good (used), Flat engraving machine (Pantograph 2D) make KIRBA type LH 172 Machine # 30.01 Year of construction 2000 Technical data: Pantograph setting 1:1 to 1:50. 12 speeds 2800 - 22000 rpm. working/template table 400 x 200 mm Csx2zqhu longitudinal adjustment 400 mm cross adjustment 150 mm height adjustment 420 mm outer dimensions approx. 1200 x 600 x 1400 mm weight approx. 250 kg used

Year of construction: 1993, Condition: used, wire diameter range: 2,5 - 6,0 mm wire feeding length: unlimited wire feeding speed: up to 36 mtr./min angle of bending: 0 - 340° 8cnqjbl9j

Condition: used, Sony Camera with Lens Japan No.62006, 12V DC, XCD SX90 Gmvo7g Model: XCDSX90 Data: 12V DC

sheet thickness aluminum (max.): 10 mm, working range: 3,000 mm, sheet thickness steel (max.): 20 mm, Year of construction: 2012, operating hours: 15,227 h, Condition: excellent (used), Equipment: Safety light barrier, Laser cutting machine with full equipment in very good condition, currently serviced. Max. Sheet metal processing size: 3000x1500mm, with shuttle table and ball support. Cmdj7np988 Steel cutting up to 20mm, VA cutting up to 12mm and aluminum cutting up to 10mm. Machine has two laser cutting heads, 5 and 7.5 inch. Automatic head and 8-fold nozzle change, automatic process monitoring.

Condition: used, Lens, lenses Lmjw7 -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Year of construction: 2007, Condition: used, x-travel: 400 mm y-travel: 200 mm z-travel: 100 mm table surface area: 410 x 300 mm voltage: 230 / 50 V / Hz total power requirement: ca. 1 kVA machine weight approx.: t dimension machine xH: m 2D Scanner for flat materials Application: Measurement of basic geometric elements of workpieces, carryover for adjustment/alignment with CAD drawings. The Z-axis is the max. height of the workpiece. Drive of the X/X and Z axes via ball screw drive with servo motor Measuring system X/XZ-axis: incremental measuring rods resolution 0,1µm Iwugkow Optics: 0.6 - 6.8 zoom range Camera: high resolution CCD-SW camera Illumination: transmitted light and bright and dark field tube Equipment: Hand control, keyboard, 2x monitors, computer "Werth".

Condition: used, Lens for profile projector Make Microtecnica Italy Msjtb Superortor Matr. 148 Type CB 50 x Diameter 85 mm Length: 190 mm

Year of construction: 2018, Condition: ready for operation (used), machine/vehicle number: A0312L0166, TYP L82 Machine no.: A0312L0166 Manufacturing Year: 07-2018 Laser Power 2000W Connection 400V/50Hz Electrical Power 30.0kVA Control Voltage 24V= Needed fusing: 3x 50A Compressed Air: 7-12 bar Nitrogen: 27 bar Bdlgq8pxigy Kyslik: 15 bar

Condition: used, Sony Camera with Lens PENTAX H1214-M, 12V DC, XCD SX90 Bjrbejempfd Model: XCDSX90 Data: 12V DC

Condition: as good as new (ex-display), CNC ultra high pressure water jet cutting machine SAME /Bogacki - 2515 BA 2D -demonstration machine - travel: 2.550 x 1.550 x 200 mm Control system: BOSCH MTX Aquacut edition - CAD / CAM system - Operating PC with portable electronics. Handwheel incl. high pressure pump HB 50 incl. stainless steel working table ( 2.700 x 1.700 mm) Bt0azkefbb incl. CE- safety device (light barriers) incl. splash guard (see pictures) incl. abrasive container (250 kg) incl. abrasive cutting head Allfi incl. red light laser incl. drilling unit 4mm diameter receptacle ER 16 - few operating hours

Condition: used, Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Bohler, started role inert gas wire electrode -Type: AVESTA Cored Wire FCW-2D 316L/SKR O 1.2 mm St2zjs -Dimension: O 300 /100 mm -Weight reel: 11.9 kg

Year of construction: 2023, Condition: new, • Cutting head optionally: 2D/TAC12/3D68 • Cutting area effectively 1502 x 3002 mm • CNC control NUM Flexmium 3D up to 40 m/min • Z-axis CNC clear height 300mm • Control housing Premium desk • Computer with 20" LED monitor and splash-proof keyboard and mouse • Waterjet software SmartCut • Waterjet cutting valve E99azhnzv • Abrasive cutting head • Abrasive dosing unit CNC with intermediate tank • Abrasiv storage tank 450 kg • Abrasiv Minihopper system pressure tank • Safety system: Triple light barriers incl. 2 mirror columns Special equipment: • Premium/MasterCut guides • Clamping frame left and front incl. eccentric clamps • Heavy duty support for workpieces up to 1000 kg/m² • Position laser • Drill spindle Subject to changes and errors in technical data and prices. Subject to prior sale Our AGB's apply which you can see on our website.

Condition: used, Lens for profile projector Make Microtecnica Italy Superortor Matr. 107 Type CB 100 x Diameter: 60 mm Length: 200 mm Fe32ksz

Condition: good (used), Optical profile grinding machines Drccbjqqg

Condition: new, Memco Pana40 Plus Ultraslim 2D infrared light curtain Transmitter + Receiver, 743 782 20 + 743 781 20 Model: Pana40 Plus - ultraslim Type: 74378120 TX + 74378220 RX Bjq3yszhwwh Elevator light curtains

Condition: new, Hezinger WaterLine HWOP cutting system Workspace 4000 x 2000 mm High pressure pump Manikandann.m 40.37 37.0 kW Collision protection ALFFI heights Abt page ECK872 4-axis CNC control system Software IGEMS 2D nest level 1 Machine type Hezinger-WaterJet HWOP Double-sided drive Cutting width 4,000 mm 07dyuv9v0 Basic working length 2000 mm Cutting speed 50 - 10,000 mm / min With the water jet Max cutting thickness 0.5 200 mm, stroke 250 mm Speed up to 25 m / min Cutting pool 4000 x 2000 mm • made of galvanised steel (stainless steel optional) • Optional installation of desilting system • Free-standing construction Drive and leadership (Parallel and transverse) have all guide rails • splash water protection • the motor is equipped with AC servo motors in the X -, Y -, and Z-axis The portal • Guide rails, cables and other elements are shielded with the help of bellows against water splashes • Special, made of aluminium and polished leadership and drive bar, provide a positioning accuracy of 0.1 mm for high cutting quality. The support Cutting head centerline single Type III standard up to 4.150 bar incl. Abrasivzufuehrung The CENTERLINE cutting head is one of the toughest and most productive cutting heads that are currently on the market, which is characterized by its long life and precise cutting quality. This cutting head

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 4700 rpm at 80 Hz -Voltage: Y 400 volts -Shaft holder: Ø 32 mm -Tool -Dimensions: 645/235/H150 mm -Weight: 55 kg Xwhxs8a

Year of construction: 2012, Condition: as good as new (ex-display), Specialised 16-head Ishida weighers for accurate weighing and dosing of Snacks and Chips, with two outlets allowing connection to two machines simultaneously. The condition is like new as this multihead weigher comes from the Ishida showroom in Birmingham, they were only used for testing. Outlets: For two machines Suitable for: Snacks and Chips Gw3fgdq Design: stainless steel, with smooth sheet metal Condition: like new Documentation: yes Year of manufacture: 2012

Year of construction: 2010, Condition: ready for operation (used), Measuring range: 400x200mm, with Instruction Manual, the PC needs to be replaced. Cfybo00myc

Condition: good (used), Measurements granite slab: 800 x 750 x 120 mm Screen: .300 mm Protractor: 360°, Nonius 2 min Power Rear Light Dark Field: 2x 100W Power Lamp Translucent: 1x 100W Vsqnty Power Light Light Field: 1x 100W Lenses: 5x + 10x + 20x Maximum achievable accuracy: 0.0015 mm (correct setting & calibration required) Dimensions LxWxH: 0.8 X 1.2 x 1.7 m Weight: about 800 Kg

Year of construction: 2021, Condition: like new (used), Robot Cobot JAKA ZU7 as good as new Bj.2021 Radius 819mm 7 kg Payload year 2021 Control: App for PC Number of axes: 6 Max. Load: 7 Kg Max. Working range: approx. 819 mm Delivery : Robot,Control,Cable,Teachpanel,Software 2 weeks commissioning warranty.no further warranty In addition, spare parts are always available from stock. Robot is fully functional and can be viewed with pleasure Ccld3ln7en Net amount plus 19% VAT

Condition: excellent (used), Industriekamera mit Objektiv C-Mount 1:2.85 , mit 5 Mega Pixel Zqvzk

Condition: used, Stainless steel elbow, welding elbow Dztvtm -Manufacturer: Outokumpu, stainless steel elbow welding elbow 1.4571 90° -Size: 114.3x2.6 -Number: 14x sheets available -Price: per piece -Dimension: 225/130/H115 mm -Weight: 1.1 kg/pc.

Year of construction: 1990, Condition: ready for operation (used), Now available Used van Aarsen 1400 2D Hammermill incl. feeder with magnet. Bzw7rj3zd2 200kW 3000 rpm 2 pieces available Amount of hammers: 272 Weight: ca. 5850kg Sieve Diameter: 600mm More information on request

Condition: good (used), Measuring range X-Y 80 x 60 mm Z 60 mm Basic configuration -Telecentric LED transmitted light Software/Hardware -3D measurement and analysis software SAPHIR: lern programming, grafical view, reading-in of CAD-files, reports with set/real comparison -Touch screen panel PC / Windows 10 Special features -QD fonction: automatical recognition of parts without previous selection -Digitisation and Bestfit 2D -Read-in of DXF files 2D Optional: - 4-step motorised zoom -LED episcopic light Electrical power supply 220-240V / 50-60Hz Blwd9ixkco Guarantee 6 months, directly from manufacturer incl. factory certificate

Year of construction: 2018, Condition: excellent (used), mit Objektiv c-Mount , 5 Mega Pixel , 2/3" ,16 mm ,1:1.4 Bq79zxrw

Condition: good (used), Image field X-Y 65 x 55 mm Z 50 mm Basic configuration -LED ring surface light, switchable and dimmable -Telecentric LED transmitted light -Telecentric 4-step motor zoom Software/Hardware -M3 measuring software: manual measurement of geometric elements with intuitive multi-touch application, measurement and evaluation in X/Y axis, tabular and grafical report -Touch-screen-panel PC / Windows 10 Special features -Read-in of DXF files 2D Electrical power supply 220-240V / 50-60Hz Iniikv9 Guarantee 6 months, directly from manufacturer incl. factory certificate

Year of construction: 1991, Condition: good (used), We can offer you CO2 tank: Volume 21050L; Working pressure 22 bar; Export from EU Ctokbgojox We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: good (used), - Type: SCH 500 / - NF M32 - Overall height: 3130 mm (from floor) - Boom length: 2400 mm - Incl. electric chain hoist with remote control Ht38zzwg7 - Load capacity: 125 kg - Total weight: 300 kg - Price on request

Condition: good (used), Enclosure size: 3300 x 1200 x 3000 mm Maximum roll width: 2600 mm Load capacity: approx. 2000 kg Dnsqv2 Electrical power: 0.75 kW

Condition: excellent (used), - Offer number: 1/109 -1/111 - High frequency spindle secondary spindle with operating unit - Manufacturer: SL Steffen Lenssen - Type: SLM120-Hc 4030 spindle SLC-62-15-1500 power unit - High frequency spindle: - Serial number :37246 - For manual adaptation to machine tools via exchangeable SK,ISO,BT or HSK adapter - Power 7 KW at 30000 rpm - Housing diameter 120 mm - Manual tool change HSK-C40 - Motor cooling :water/oil - Double bearing protection - double labyrinth - sealing air - Low wear robust ceramic bearing grease lubricated - Tool shank tension up to 16 mm - Operating unit cobination - Type : SLC-62-15-1500 - Serial number :07/0650 - with digital frequency converter - Output power 15KVA - optional external analogue or remote control - with cooling unit 1,5 KW at 42 C° - with electronic temperature control - Tank capacity 8 L - pressure reducer with cut-off function - dimensions housing : H 835mm x W 512mm x D 500mm - 400 Volt 32A-50/60 Hz - remote control - Display 4x 16 characters - speed preselection - actual speed - actual power - with operating instructions - weight total ca 100 kg - optical condition according to photos - used - functional Notes: 2rw7xi The goods offered here usually come from company liquidations and insolvencies. Due to missing nameplates it is not always possible to give exact item data. The item pictures are original photos that show the actual item condition. If several identical items are offered, only one of the items is photographed. There may be slight variations in the item condition of the individual item. Should an item be opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively for the identification and description of the existing goods.

Condition: as good as new (ex-display), Pipe turning device swiveling Load capacity max. 1000 Kg diameter range DN 20 to DN 400 including the corresponding flanges speed infinitely variable 0 - 130 cm/min. Connected load 400 V drive torque 32 Nm with steel rolls or plastic rolls interchangeable load in horizontal position 1000 Kg load in vertical position 500 Kg dimensions length: 1196 x width 480 x height 1470mm Weight 200 Kg Dlpfwp

Year of construction: 2005, Condition: like new (used), Autoclave, diam. 600x6000mm, indirectly heated by thermic oil, only used for some years for vulcanizing rubber profiles and rubberlined rollers and wheels. Because of relocation, been taken out of production. Complete with oilheater, oiltank, pompinstallation, and Yt2spw control panel, pipework (oil, gasses). Installation without certificate.