PRIMERGY TX150 S4

PRIMERGY TX150 S4 

System configurator and order-information guide 

March 2006 

Contents 

Instructions 

Configuration 

diagram 

Configurator 

0 System software 

I Basic unit 

I I Processor 

I I I Memory 

I V Graphics 

V Accessible drives 

VI Hard disk drives 

VII SCSI Controller 

V I I I Disk array 

I X Communication/Network 

X System management options 

X I Miscellaneous 

X I I Country specific options 

Change 

report 

PRIMERGY Server


PRIMERGY TX150 S4 Status 2006-02-21 

Instructions 

This document contains basic product and configuration information that will enable you to configure your system via 

P C - / S y s t e m - A r c h i t e c t . 

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete 

P R I M E R G Y R a c k s y s t e m . 

You can configure your individual PRIMERGY server in order to adjust your specific requirements. 

The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect 

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through 

the configurator by following the lines from the top to the bottom. 

Section III Memory, example 

There are X memory slots which can be equipped with XXX MB. 

It is permissible to make up to X passes through the memory upgrade options. 

X 

times 

S26361-XXX-XXX 

S26361-XXX-XXX 

Memory XXX MB Memory XXX MB 

max. X times per system max. X times per system 

In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x 

Please note that there are information symbols which indicate necessary information. 

Further information in the internet see: 

http://www.primergy.com 

http://extranet.fujitsu-siemens.com/primergy 

(internet) 

(extranet) 

Prices and availability see price list and PC-/ System-Architect 

Subject to change and errors excepted 

Fujitsu Siemens Computers 

Enterprise Products - PRIMERGY Server 2 of 18



Configuration diagram PRIMERGY TX150 S4 

System unit ( I ) 

SIDE VIEW 

FRONT VIEW 

Standard Power Supply 

or PS (I) 5.25" x 1.6" 

3 x 5.25" 1 x 5,25" plus 

optional HDD-Box 

3.5"x1" ID2 

1 . P S U 2 . P S U 

Redundant power supply option 5.25" x 1.6" 

3.5"x1" ID1 

3.5"x1" ID0 

Modul 1 

Pentium 4 or Celeron optional HDD-Box: 

- Support for up to 3 

Modul 3 hot plug SCSI 1" HDDs 

3.5"x1" Floppy disk (optional) 

- occupies two 5.25" bays 

B a n k 1 

5.25" x 1.6" CD / DVD drive 5.25" x 1.6" CD / DVD drive 

Processor ( II ) 

B a n k 2 

Modul 2 Accessible drives ( V ) 

Modul 4 

Memory ( III ) 

1 PCI-Bus 

Extension slots 

SCSI Controller ( VII ) 

Disk array ( VIII ) Hard disk drives ( VI ) 

Communication/Network ( IX ) 

PCIe x 1 

6. 

PCIe x 4 (x8 Slot) 

SCSI 1" or SATA 1" 

5. 

PCI short (5V) 32-Bit / 33MHz 


4. 

PCI short (5V) 32-Bit / 33MHz 


3. 

PCI-X 66 long (3,3V) 


2. 

PCI-X 66 long (3,3V) 

(Slot for Zero-Channel Controller) 

PCI long (5V) 32-Bit / 33MHz 

1. 

Key: 

Included in basic unit 

Option 




Start PRIMERGY TX150 S4 PRIMERGY TX150 S4 Status 2006-02-21 

SW Configurator IA32 

with OEM-Software 

without OEM-Software 

for PRIMERGY Server for PRIMERGY Server 

Later use of OEM operating 

system software is not allowed, 

apart from few VMware 

add-ons 

For all SW products listed below please refer to the corresponding software configurator accessible 

via the Extranet under "PC Configurations, Configurator for PRIMERGY SW", URL see below 

Microsoft - Software: **) OES/NetWare-Software ***) PRIMECLUSTER *) 

- Small Business Server 2003 - N e t W a r e - Clustering 

- Windows Server 2003, only for SCSI variant - Load Balancing 

Web Edition (only English) 

Standard 

Edition 

Enterprise 

Edition 

- Additional loose Linux - Software: **) 

Client-Access-Licenses (CALs) - SUSE Linux Enterprise Server 

(not for Web Edition) - SUSE Professional Linux 

- Red Hat Enterprise Linux 

SCO - Software: **) 

- SCO OpenServer 

- SCO UnixWare 

CITRIX-Software für 

Windows: W-MF 

- Presentation Server 

LoadBalancing 

Additional User Licences 

Manageability Software: V**) 

Details eg. version numbers are published 

- RemoteView Software in the separate SW-Configurator 

- RemoteView Service Board 

- RemoteDeploy 

- Terminal Server Deploy *) Pay attention to release information on datasheet under 

- vPMS 2005std http://www.primecluster.com 

- Altiris Server Deployment 

**) Pay attention to release and order information in PRINCE -> Operating System 

Backup-Software / 

http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm 

Application-Software: U 

- ARCserve 

- openSM2 ***) Supply over distribution or procurement from FSC VP BC Software 

Various Software Configurators and release lists (OS-Matrix / System Management / Security) can be optain under the following adresses: 

for internal users: 

for partners: 

http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm 

http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm 

Continue with PRIMERGY 

HW configurator 





SW Configurator EM64T 

with OEM-Software 

without OEM-Software 

for PRIMERGY Server for PRIMERGY Server 

Later use of OEM operating 

VMware-Software system software is not allowed, 

- VCMS VirtualCenter Management Server apart from few VMware 

- GSX Server and GSX Virtual Infrastructure Node add-ons 

- P2V Assistant Enterprise Edition 

For all SW products listed below please refer to the corresponding software configurator accessible 

via the Extranet under "PC Configurations, Configurator for PRIMERGY SW", URL see below 

Microsoft - Software: W Linux - Software: L *) **) 

only - Windows Server 2003, only - SuSE Linux Enterprise Server 

EM64T x64 Standard Edition EM64T - Red Hat Enterprise Linux 

x64 Enterprise Edition 

- Additional loose 

Client-Access-Lizenzen 

(CALs) 

Manageability Software: V**) 

Details eg. version numbers are published 

in the separate SW-Configurator 

- RemoteView Software 

- RemoteView Service Board 

- RemoteView Diagnosis *) Pay attention to release information on datasheet under 

http://www.primecluster.com 

**) Pay attention to release and order information in PRINCE -> Operating System 

http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm 

***) Supply over distribution or procurement from FSC VP BC Software 

Various Software Configurators and release lists (OS-Matrix / System Management / Security) can be optain under the following adresses: 

for internal users: 

for partners: 

http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm 

http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm 

Continue with PRIMERGY 

HW configurator 





Section I Basic unit 

System unit consisting of: 

* Housing including standard power supply (no redundancy) 

* Sliding screen with lock (only for floorstand version) 

Systemboard with: 

* 7 PCI slots: 

1x PCIe x 1 

1x PCIe x 4 (x8 Slot) 

1x PCI-X 66 long (3,3V) 

1x PCI-X 66 (3,3V) ZCR Slot 

1x long / 2x short 32Bit / 33MHz (5V) 

* 4 memory slots for up to 8GB (PC4200) registered DDR II RAM (ECC), max. 2GB modul per slot 

* 1 drive bay 3.5" occupied by 1 floppy disk 1.44MB 1" height (optional) 

* 3 bays 5,25" for accessible drives 

* 4 bays 1" for hot plug SCSI/SATA HD) 

* ATI Range XL Graphic controller 8MB 

* Intel Broadcom (5721) 10/100/1000 Mb/s on-board 

* 1 x Fast-IDE (ATA) Controller on-board (for 1x 2 devices) 

* 1-channel Ultra 320 SCSI Controller LSI 1020A on-board 

with HW RAID IME (IME = Integrated Mirroring Enhanced) - only SCSI basic units 

* 4 Port SATA over Chipset with HW RAID 0/1/10 (only SATA basic units) 

Options: 

* Hot plug PS or a second redundant hot plug PS version can be configured by ordering the 

appropriate upgrade option 

* LSI Zero Channel RAID option, simultaneous use of HD and Tape Drive possible 

* LSI 4 Port SATA PCI Plug in card for HW RAID 0/1/10/5 

Cables: 

1. IDE cable for CD/DVD 

2. With SCSI variant wide LVD SCSI cable for connection of the HD backplane and two 

accessible drives 

3. With SATA variant 4x SATA cable on backplane (LVD SCSI cable for connection of two 

accessible drives has to be ordered separately) 

PS/2 mouse (only for floorstand version) 

ServerStart packet incl. ServerBooks CD, ServerSupport CD and ServerView 

External Interfaces: 

2x RS-232-C (serial, 9 pins) 

1x Centronics (parallel, 25 pins, EPP/ECP compatible) 

1x keyboard (PS/2) 

1x mouse (PS/2) 

1x VGA (15 pins) 

1x USB 2.0 on front and 2x USB 2.0 on rearside 

1x LAN RJ45 

Cables included in basic unit 

Connections Cable PRIMERGY TX150 S4 

1. IDE CD/DVD ◦ ◦ ◦ Key: 

¥ 68pins 

2. Backplane for 1x4 ¥ 68 or 50pins 

SCSI hard disks ¥ ¥ ¥ ¥ ◦ IDE 

incl. terminator terminator 

◦ S A T A 

3. Backplane for 1 x 4 

SATA hard disks ◦ ◦ ◦ ◦ ◦ 

A 




A PRIMERGY TX150 S4 Status 2006-02-21 

Floorstand version SCSI basic unit 19" Rack version SCSI basic unit (5 U) 

Pentium 4 processor, memory 


P4 630 3.0GHz/800MHz/2MB 512MB S26361-K999-V107 P4 630 3.0GHz/800MHz/2MB 512MB S26361-K999-V307 

P4 630 3.0GHz/800MHz/2MB 1GB S26361-K999-V117 P4 630 3.0GHz/800MHz/2MB 1GB S26361-K999-V317 





PD 820 2.8GHz/800MHz/2x1MB 512MB S26361-K999-V136 PD 820 2.8GHz/800MHz/2x1MB 512MB S26361-K999-V336 

PD 820 2.8GHz/800MHz/2x1MB 1GB S26361-K999-V146 PD 820 2.8GHz/800MHz/2x1MB 1GB S26361-K999-V346 





Floorstand version SATA basic unit 19" Rack version SATA basic unit (5 U) 

RAID on Chip(RAID 0/1/10), RAID on chip (RAID 0/1/10), 

CeleronD processor, memory 

CeleronD processor, memory 

Celeron 346 3.06GHz/533/256 512MB S26361-K999-V233 Celeron 346 3.06GHz/533/256 512MB S26361-K999-V433 















S26113-F483-E1 Floorstand S26113-F483-E1 

hot plug power supply upgrade option versions hot plug power supply upgrade option 

With this option the basic units contains A second, redundant With this option the basic units contains 

1 hot plug power supply, 1 power power supply requires 1 hot plug power supply, 1 power 

backplane and 1 dummy cover an additional power backplane and 1 dummy cover 

replacing the standard power supply c o r d replacing the standard power supply 

(no redundancy !) (section XII) (no redundancy !) 

max. 1x per system max. 1x per system 

S26113-F483-E11 

S26113-F483-E11 

2nd power supply module (PSU) 2nd power supply module (PSU) 

for redundancy for redundancy 

occupies one bay for occupies one bay for 

hot plug power supply hot plug power supply 


For later conversion of basic units with standard power supply 

to hot plug power supply, the following kit is available: 

1.) hot plug PS upgrade kit, incl. 2 PS module: S26113-F483-L1 

Conversion standard into hot plug PS 

2.) Supplementary power supply module S26113-F483-L11 

for redundancy or repair 

B1 

B2 




B1 B2 PRIMERGY TX150 S4 Status 03.05.2005 

PRIMERGY Floorstand 

PRIMERGY Rack 

PRIMECENTER- Rack 

SNP:SY-F1647E301-P 

"rack-mounting ex factory" 

Installation ex works for one 

This service is to be ordered once 

server or subsystem 

per installable server/storage 

Hereby the rack will be delivered 

subsystem, in order to get the 

completely pre-mounted and 

server/storage subsystem 

all wired connections are tested 

mounted into the PRIMERGY racks. 

With racks 12U, 24U, 38U: In case of the 46 U PRIMERGY rack, 

Systems and components this service has to be ordered, 

will be delivered installed in the rack to get the mounting kits and the 

With racks 46U: cables installed. 

Systems and components 

will be delivered separately 

To be ordered only together with 

a 

PRIMERGY- 

PRIMECENTER 

rack 

e.g.:SNP:SY-K614V10x-P 

S26361-K826-V10x 

refer configurator PC-rack 

max. 1x per System 

For later conversion of TX150 base unit floorstand into base unit rack the following kit is availible 

1.) Conversion TX150S4 base unit floorstand into base unit rack S26361-F2618-L240 

rack mount kit has to be ordered separately 

For (later) mounting in racks the following kits are available: 

1.) PRIMERGY Classic-rack 42/23U adapter kit: S26361-F1331-L300 

incl. cable carrier 

2.) PRIMERGY DC- / PC- rack mounting kit: S26361-F2734-L32 

incl. DC- PC- bracket, cable managment 

3.) PRIMERGY mounting kit for server racks S26361-F2734-L32 

conforming to EIA standards EIA-310-D for 19" racks. 

C 




C PRIMERGY TX150 S4 Status 2006-02-21 

Section II Processor 

Section III Memory 

There are 2 memory banks with 2 DIMM slots each. 

Single channel memory configuration allow maximum flexibility: 

Additional memory can be configured as single memory modules. 

Dual channel memory configurations for maximum performance: 

For optimum performance memory has to be configured in pairs of memory modules with identical size. 

S26361-F3000-E513 S26361-F3000-E514 S26361-F3000-E515 

Main memory 512MB Main memory 1GB Main memory 2GB 

3x DDR2 533/PC2-4200 ub ECC DDR2 533/PC2-4200 ub ECC DDR2 533/PC2-4200 ub ECC 

consisting of one module consisting of one module consisting of one module 

occupies one bank occupies one bank occupies one bank 

max. 3x per system max. 3x per system max. 3x per system 

Section IV Graphics 

ATI Rage XL (8MB) 

D 




D PRIMERGY TX150 S4 Status 2006-02-21 

Section V Accessible drives 

There are 3x 5.25" bays for accessible drives: 

- 1x 5.25" bay is occupied by a DVD-/CD- respectively a CD-RW drive 

- 2 x 5.25" bays remaining, can be occupied by 2x accessible drives 

Setup TX150 S4 by ServerStart is supported with following configurations: 

no DVD, no CD: 

remote installation only ( PXE service & DHCP server required) 

built in CD/DVD: 

UNC Network share reachable or USB Floppy or MemoryBird connected 

One of the following USB devices must be used for integrating the drivers during installation 

process if no automized (e.g. Serverstart / Altiris / RIS / ADS / …) installation is done: 

1) FDD USB (external): S26391-F264-L226 

external USB FDD (USB cable included) 

2) USB Memorybird: Memorybird 256 MB S26391-F6046-L256 

Memorybird 1GB S26391-F6046-L24 

S26361-F2575-E1 

Floppy disk drive 1" 

Connector: 

26pin 

incl. description (Ger/US) 

1" * 3.5", anthracite bezel 

max. 1x per system 

2x 

SNP:SY-F2234E1-A 

S26361-F3148-E1 

DVD-ROM ATAPI DVD-RW 16x super multi drive 

all formats, DUAL/DL, DVD-RAM 

incl. description (Ger/US) only W2K, W3K and Linux 

1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel 


S26361-F3157-E3 

With SCSI variant: 

Tape drive LTO2HH Ultrium If the tape drive LTO2HH Ultrium is used, the 

200GB, 24MB/s, U160 SCSI SCSI 160 Controller S26361-F2399-E2 and the 

Connector: HD68 SCSI cable S26361-F2814-E6 is to order. 

without 

cable 

incl. description (Ger/US) With SATA variant: 

data and cleaning cartridge If a tape drive is used, the 

1.6 * 5.25", anthracite bezel SCSI 160 Controller S26361-F2399-E2 and the 

max. 1x per system SCSI cable S26361-F2814-E6 is to order. 

S26361-F2849-E3 

S26361-F3224-E3 

Tape drive VXA-2 Tape drive VXA-320 

80GB, 6MB/s, U2W SCSI 160GB, 12MB/s, U160 SCSI 

Connector: HD68 Connector: HD68 

2x without cable without cable 

incl. description (Ger/US) incl. description (Ger/US) 

data and cleaning catridge data and cleaning cartridge 

1.6 x 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 


S26361-F2848-E3 

Tape drive DDS Gen5 

S26361-F2848-E31 (only for OBDR) 

DDS-G5 for One buttom dis. recov. 

36GB, 3MB/s, U2W SCSI 

Connector: 

HD68 

without 

cable 

incl. description (Ger/US) 

data and cleaning catridge 

1.6 x 5.25", anthracite bezel 


E 




E PRIMERGY TX150 S4 Status 2006-02-21 

S26361-F2814-E6 Backup drive and hard disk should run on separate channels 

68-Pin Kit for accessible drives 

Cable with Terminator 

To connect acc. drives to If internal HDD's are connected at the RAID controller 

separate SCSI controller (not IME/ZCR), then for internal accessible drives 

max. 1x per system the cable S26361-F2814-E6 must be ordered additionally! 

(that does not apply to SATA variant) 

S26361-F2826-E1 

HDD-Box for additional 

3x 1" Ultra 320 SCSI HDD's Only for SCSI variant 

incl. SCSI cable Only with LSI 2 channel RAID controller 

occupies 2 accessible S26361-F3006-E128 or -F3090-E256 

5.25" x 1.6" drive bays 

3,2 x 5,25", black bezel 


Section VI Hard Disk Drives 

S26361-F3121-E173 S26361-F3121-E114 S26361-F3121-E130 

Hard disk 73GB in 1" carrier Hard disk 146GB in 1" carrier Hard disk 300GB in 1" carrier 

10000rpm,


F PRIMERGY TX150 S4 Status 2006-02-21 

Section VII SCSI-Controller 

All internal cables and adapters are included within the basic units and components respectively 

Cabeling priorities: 

internal HDs are cabled according to following priorities. 

(Prio 1 - 2 ): 

1.) For a configuration without any Disk Array Controller and without zero channel RAID 

the onboard U320 Controller is connected to the internal HDs. 

2.) For a configuration with a 2-channel Disk Array controller (without zero-channel RAID) 

One channel will be connected with the internal hard disks. 

The second channel is externally available. 

internal backup devices are cabled according to following priorities. 

(Prio 1 - 2 ): 

1) For a configuration without additional SCSI controller 

the onboard U320 controller is connected to internal backup devices 

2) For a configuration with Adaptec SCSI Card 29160 S26361-F2399-E2 

(without SCSI 160 controller S26361-F2644-E11) 

this controller is connected to internal backup devices 

A. on-board SCSI-controller for accessible drives and SCSI-HDs 

1-channel Ultra 320 SCSI on-board controller; included as standard. 

Example for IME with 3 data devices: 

LSI Integrated Mirroring Enhanced (IME) is a RAID 1 implementation (no RAID 0 support). It can be operated also with an odd 

number of hard disks (max. one RAID 1 Set). There are, depending on system, up to 6 hard disks, including a hot spare disk, 

possible. Supportet are only the operating systems Windows2000/2003 as well as SuSE and RedHat Linux. 

All internal cables and adapters for the basic unit and for components are included. 

1x per TX150S4 

T26139-Y3849-L1 Only SX10 Backup is released for the external 

External on-board SCSI Interface connection of the on-board SCSI controller 

Cable and external and the 29160. 

connector interface (HD68) Cable sold separately not mounted in factory. 

occupies one connection panel Use this cable only if on-board controller is not 

max. 1x per system for ext. used otherwise (eg. S26361-F2814-E6) 

G 




G PRIMERGY TX150 S4 Status 2006-02-21 

B. SCSI controller for internal backup drives 

S26361-F2399-E2 

SCSI 160 Controller 

Adaptec SCSI Card 29160 

1 channel: LVD + Fast/ Ultra (decoupl.) 

LVD connect. for HD, without cable 

Fast/Ultra connect. for acc. drives 

64/66 PCI, min 180 mm 

int: Fast 50-pin or Ultra HD68 

+ LVD HD68; ext: HD68(LVD) 

S W : 


S26361-F2814-E6 



To connect acc. drives to 

separate SCSI controller 


C. SCSI controller for external drives and peripheral devices 

S26361-F2399-E1 Only SX10 Backup is for external 

SCSI U160 controller connection at the SCSI controller. 

Adaptec SCSI Card 29160 

1 channel: LVD + Fast/ Ultra (decoupl.) 

LVD connect. for HD, without cable 

Fast/Ultra connect. for acc. drives 

64/66 PCI, min 180 mm 

int: Fast 50 pol oder Ultra HD68 

+ LVD HD68; ext: HD68(LVD) 

S W : 


Section VIII Disk Array 

max. 4x 

D. LSI - Controller 

1-channel Ultra 320 SCSI on-board controller with LSI Integrated Mirroring (IME) 

Standard SCSI-cabling of a PRIMERGY TX150 S4 basic unit with on-board controller 

Ultra 320 SCSI controller is connected to the internal hard disks and internal backup devices, 

if no additional HD/backup device controllers are configured. 

1x per PRIMERGY TX150 S4 

D. zero-channel RAID controller (320-0x) for internal Disk Array 

and additional RAID controllers for internal / external Disk Array 

S26361-F3085-E128 

0-channel RAID controller 

LSI Not for 

320-0x SATA variant! 

128MB SDRAM ECC Cache 

BBU optional Zero channel RAID controller 

in combination with on-board LSI must be installed in the 

U320 SCSI controller blue marked bay. 

without 

cable 

64Bit/133MHz PCI-X controller With zero channel RAID controller 

3.3V power supply & signaling the IME function is no longer 

max. 1x per system available. 

S26361-F3085-E10 

Cache Battery Backup Unit 

max. 1x per Controller 

to 

be 

continued 

on next page 

H 




H PRIMERGY TX150 S4 Status 2006-02-21 

continued 

on previous E. 2-Kanal Ultra 320 SCSI Controller für Disk Array 

page 

S26361-F3006-E128 

S26361-F3090-E256 

2-channel RAID Controller U320 2-channel RAID Controller U320 

LSI 

LSI 

320-2 320-2x 

128MB SDRAM ECC Cache 256MB SDRAM ECC Cache Not for 

1x default with TBBU default with TBBU SATA variant! 

plug: internal 2x HD68; plug: internal 2x HD68; 

external: 2x VHDCI external: 2x VHDCI 

without cable without cable 

64/66 PCI controller, 180mm 64/133 PCI-X controller, 180mm 

3.3V and 5V tolerant signaling 3.3V and 5V tolerant signaling 


The fitting connection cables can be found in the configurator 

of the external storage system and / or rack. 

S26361-F2814-E6 Backup drive and HDD should run on separate channels. 



To connect acc. drives to If internal HDD's are connected at the RAID controller 

separate SCSI controller (not IME/ZCR), then for internal accessible drives 

max. 1x per system the cable S26361-F2814-E6 must be ordered additionally! 

F. 4. Port SATA RAID 5 controller for Disk Array 

as soon as available 

S26361-F3216-E1 

SATA RAID 5 Controller 

128MB SDRAM ECC Cache 

BBU 

optional 

Plug: int.8x SATA 3Gb 

1x PCI x4 Not for 

max. 1x per system SCSI variant! 


S26361-F3216-E10 

Cache Battery Backup Unit 

max. 1x per controller 

I 




I PRIMERGY TX150 S4 Status 2006-02-21 

Section IX Communication / Network 

Gigabit Ethernet Contr. on-board The Intel LAN controllers 1000MT can be used 

Broadcom with the on-board controller in Teaming Mode 

ext: for RJ 45-connector 

SW: AFT, VLAN, Fast Channel 

4x 

S26361-F3053-E1 

S26361-F3142-E1 

Gigabit Ethernet Contr. 1000TX Gigabit Ethernet Contr. 1000TX 

Eth.Ctrl 1x1Gbit PCI-X Pro/1000MT Cu Eth.Ctrl 1x1Gbit PCI32 PRO/1000GT Cu 

Intel PRO/1000 MT Server Adapter Intel Pro/1000 GT Adapter 

Adapter Teaming Support PCI 32 (33/66MHz), 

PCI-X (PCI64/133), min 165 mm ext: for RJ45-plug, Cat 5 

ext: for RJ45-plug, Cat 5 connection with Cat 5 cabling 

connection with Cat 5 cabling SW: VLAN, Fast & Gbit Etherchannel 

SW: VLAN, Fast & Gbit Etherchannel max. 4x per system 



S26361-F3011-E1 

S26361-F3227-E1 

Gigabit Ethernet Contr dual 1000TX Gigabit Ethernet Contr dual 1000TX 

Eth.Ctrl 2x1Gbit PCI-X PRO/1000MT Cu Eth.Ctrl 2x1Gbit PCI-X PRO/1000GT Cu 

Intel Pro/1000MT dual Server Adapter Intel Pro/1000GT dual Server Adapter 

Adapter Teaming Support PCI-X (PCI64/133) 

PCI-X (PCI64/133), min 163 mm ext: for RJ45-plug, Cat 5 

ext: for RJ45-plug, Cat 5 max. 2x per system 

connection with Cat 5 cabling 

SW: VLAN, Fast Etherchannel 


S26361-F1809-E2 

ISDN S O Controller PCI 

Eicon Diva Server BRI-2M 2.0 

Incl. 

S O -connector 

occu. short PCI slot min. 170 mm 

SO-Interface 


J 




J PRIMERGY TX150 S4 Status 2006-02-21 

Section X System management options 

S26361-F2425-E103 RemoteView Software 5.0 is 

RSB S2 LP 3HU contained in 

RemoteView Service Board S2 S26361-F2425-E103 

Low Profile Version with 3 U bracket RemoteView Service Board S2 LP 3HU 

for one standard PCI-slot 

incl. cables and RV SW 


S26361-F2425-E305 

RSB S2 LP external power supply 

RemoteView Service Board S2 

low profile external power supply 

including power cable 

with Euro- and Euro socket connector 

Section XI Miscellaneous 

S26361-F1652-L4 In connection with rack configurations 

Modem external 56kbps (V.90) the install variant of the modem 

MultiTech (S26361-F1652-E4) has to be ordered 

MT5643ZBA-Global (see rack configurator) 

international 

approval 

incl. 2m Telephon cord RJ11/RJ11 

Adapter Plug RJ11/TAE 

Serial Interface cable DB25m / DB9f 

AC-Adapter w. German Power Cord 

occupies one COM port 


K 




K PRIMERGY TX150 S4 Status 2006-02-21 

Section XII Country specific / rack specific options 

A country specific power cord has to be ordered for all floorstand versions: 

- once per basic unit and an additional second cable 

- if an second hot plug, redundant power supply modul is ordered. 

PRIMERGY TX150 S4 Floorstand PRIMERGY TX150 S4 Rack 

Power cord for following countries: 

1,8 m, grey Country specific power cords are not 

required for rack versions, except for USA 

T26139-Y1740-E10 D, A, B, F, NL, FIN, S, N, E, P, RUS, TR &Canada. Power cords are shipped in a rack 

max. T26139-Y1742-E10 USA, Canada version with inlet connector for non-heating 

2 x T26139-Y1743-E10 Switzerland apparatus. (1x with Standard PSU, 

T26139-Y1744-E10 UK, Ireland 2x with hot plug upgrade) 

T26139-Y1745-E10 

Italy 

T26139-Y1746-E10 Denmark T26139-Y1742-E10 USA, Canada 

T26139-Y3850-E10 No power cord as order option For shipments to USA&Canada, you have to order 

one power cord (1,8m, grey) per power supply. 

Attention: For connection of a monitor 

to the system an additional country 

specific power cord has to be 

ordered as option. 

Power cord for optional monitor connection for the following countries: 

1.8m, 

grey 

T26139-Y1740-L10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR 

T26139-Y1742-L10 USA, Canada 

T26139-Y1743-L10 

Switzerland 

T26139-Y1744-L10 U K , I R 

T26139-Y1745-L10 

Italy 

T26139-Y1746-L10 

Denmark 

Powercord 3-way splitter 1M to 3F 

0.78m, 

grey 

T26139-Y3692-L1 

Adapter for the connection of up to 3 PS-modules or up to 

2 PS-modules and one monitor to the mains connection. 

Both, standard and hot plug power supplies, are supported. 

Other options and Peripherals 

For other options refer to the section "Product-specific options 

These options are supplied loose with the shipment. 

For suitable peripherals for this product refer to the section "Peripherals/communication". 

Option for Floorstand 

keyboards for floorstand versions for following countries: 

S26381-K397-E110 USA / international 

S26381-K397-E120 

Germany 

S26381-K397-E140 

France 

S26381-K397-E155 Sweden / Finland 

S26381-K397-E165 United Kingdom 

S26381-K397-E180 

Spain 

S26381-K397-E185 

Italy 

End PRIMERGY TX150 S4 





Cange Report 

Date Order number Changes 

2006-02-14 S26361-F3224-E3 Tape drive VXA-320 160GB, 12MB/s, U160 SCSI - now available 

2005-12-15 S26361-F3227-E1 Gigabit Ethernet Controller dual 1000TX - as soon as available 

2005-12-02 S26361-F3216-E10 Cache Battery Backup Unit - now available 

2005-12-02 S26361-F3216-E1 SATA RAID 5 Controller 128MB - now available 

2005-12-02 S26361-F3006-E128 2-channel RAID Controller U320 LSI 320-2 128MB - now available 

2005-12-02 S26361-F3224-E3 Tape drive VXA-320 160GB - now available 

2005-12-02 S26361-F3218-E250 Hard disk 250GB SATA standard 7200rpm - now available 



2005-12-02 S26361-F2826-E1 HDD-Box for additional 3x 1" Ultra 320 SCSI HDD's - now available 

2005-12-13 S26361-K999-V458 PY TX150S4ra/PD 830/2G - now available 

2005-12-13 S26361-K999-V448 PY TX150S4ra/PD 830/1G - now available 

2005-12-13 S26361-K999-V438 PY TX150S4ra/PD 830/512M - now available 

2005-12-13 S26361-K999-V429 PY TX150S4ra/P4 650/2G - now available 


2005-12-13 S26361-K999-V409 PY TX150S4ra/P4 650/512M - now available 



2005-12-13 S26361-K999-V407 PY TX150S4ra/P4 630/512M - now available 

2005-12-13 S26361-K999-V258 PY TX150S4fa/PD 830/2G - now available 

2005-12-13 S26361-K999-V248 PY TX150S4fa/PD 830/1G - now available 

2005-12-13 S26361-K999-V238 PY TX150S4fa/PD 830/512M - now available 

2005-12-13 S26361-K999-V229 PY TX150S4fa/P4 650/2G - now available 


2005-12-13 S26361-K999-V209 PY TX150S4fa/P4 650/512M - now available 



2005-12-13 S26361-K999-V207 PY TX150S4fa/P4 630/512M - now available 

2005-12-13 S26361-K999-V358 PY TX150S4rs/PD 830/2G - now available 

2005-12-13 S26361-K999-V348 PY TX150S4rs/PD 830/1G - now available 

2005-12-13 S26361-K999-V338 PY TX150S4rs/PD 830/512M - now available 

2005-12-13 S26361-K999-V329 PY TX150S4rs/P4 650/2G - now available 


2005-12-13 S26361-K999-V309 PY TX150S4rs/P4 650/512M - now available 



2005-12-13 S26361-K999-V307 PY TX150S4rs/P4 630/512M - now available 

2005-12-13 S26361-K999-V158 PY TX150S4fs/PD 830/2G - now available 

2005-12-13 S26361-K999-V148 PY TX150S4fs/PD 830/1G - now available 

2005-12-13 S26361-K999-V138 PY TX150S4fs/PD 830/512M - now available 

2005-12-13 S26361-K999-V129 PY TX150S4fs/P4 650/2G - now available 


2005-12-13 S26361-K999-V109 PY TX150S4fs/P4 650/512M - now available 



2005-12-13 S26361-K999-V107 PY TX150S4fs/P4 630/512M - now available 

2005-11-23 S26361-F1809-E2 ISDN SO Controller PCI Eicon Diva Server BRI-2M 2.0 - now available 

2005-03-31 First release

PRIMERGY TX150 S4

Create successful ePaper yourself

Delete template?

Save as template?