Leica Objektive HC PL APO 10x/0.40

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heating thermostat from 40°C to 250°C for professional thermostats LAUDA PRO is a cutting-edge produ (more)ct line, designed to be the laboratory tools of the future. A significant innovation was the division between thermostats dedicated to internal applications and those dedicated to external applications. Then, the choice of offering products with tanks of a few liters allows the operator to quickly reach the desired temperature. New criteria have also been adopted for the design of the control panels. Two operational approaches are available, Basic, with OLED screen and essential but professional features, and Command Touch (named 'C'), the ultimate in the LAUDA experience, with touch display, graphic displays and numerous functions. In either case, the control panel can be removed from the thermostat for maximum operational flexibility and a noticeable decrease in instrument height. All thermostats are equipped with an Ethernet, USB interface and a Pt100 connection as standard. Cooling thermostats are also available with natural refrigerants. In addition, as standard, they are equipped with a cooling system that allows a lowering of the thermostat temperature with water. Notable features - Removable control panel for remote control - Stainless steel bathtubs (insulated with handles and drain tap) - 8-stage LAUDA Vario internal pump - Ethernet interface, USB and Pt100 connection as standard - Drain cock on the front of the device Accessories included Tank covers, pipe fittings with screw caps for the cooling coil Graph of heating performance of PRO P LAUDA thermostats.

CS 60 PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extractor cove (more)r and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3 PVC shelves (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Door open alarm - Ventilation

This listing for a 1 of 2 BD Max PCR MachineBD MAX System is intended for in vitro diagnostic (IVD)  (more)use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR.The BD MAX System is capable of:Independent nucleic acid extraction and purification with built in extractor.PCR amplification using thermal cycling across 24 lanesReal time detection of products of amplificationIdentification of each Sample Buffer tube by external barcode readerWork List verification by internal barcode readerFluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysisQualitative, quantitative and melt sample analysisFeatures:Integrated and fully-automated extraction and thermocycling stepsProcesses and analyzes up to 24 specimens per runOn-board lysis and extraction with pre-filled reagent stripsReal-time PCR with two 24-lane microfluidic PCR readersDedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715Consistent results through standardized workflow and protocolsRapidly expanding menu and open-system options to help address emerging testing needsLess than one minute of hands on time per sampleElectrical Requirements100 to 240 V, 50/60 Hz, 10 A, 300 VA MaxDimensions:Weight250 lb.Depth28.5 in.Height 37 in.Width 29.7 in.

APELEX laboratory rocking shaker Oscillation speed: 5 – 50 /min Operating mode: continuous With 2 pl (more)astic bins

NEW: MOTIC series BA210 LED microscope 4 plan objectives Model: BA210 LED Binocular head N-WF 10 x / (more) 20 mm widefield adjustable eyepieces with diopter adjustment on both tubes Rectangular plate 140 x 135 mm Dimmable 3W LED lighting 4 objectives CCIS EF-N PLANS: 4x 10x 40x 100x immersion oil New in box Date of manufacture: 2023 Warranty: 1 year return to workshop