Types of intersection of road and design parameters of road intersection
â˘Download as PPTX, PDFâ˘
115 likesâ˘75,001 views
This is very informative for civil engineering students better say transportation engineering .
Recommended
More Related Content
What's hot
What's hot (20)
Viewers also liked
Similar to Types of intersection of road and design parameters of road intersection
Similar to Types of intersection of road and design parameters of road intersection (20)
Recently uploaded
Recently uploaded (20)
Types of intersection of road and design parameters of road intersection
- 2. GROUP 6 ď§ Awais Anjum ⢠Munsif Ali Naqvi ⢠Iftikhar Zulfiqar ⢠Mobasher Iqbal ⢠Danial Sultan ⢠Walli Ejaz (UW-10-BSc-CE-007) (UW-10-BSc-CE-017) (UW-10-BSc-CE-009) (UW-10-BSc-CE-016) (UW-10-BSc-CE-045) (UW-10-BSc-CE-050)
- 3. TYPES OF INTERSECTIONS OF ROAD AND DESIGN PARAMETERS OF INTERSECTION
- 4. Intersection of road ⢠Intersection is an area shared by two or more roads. ⢠This area is designated for the vehicles to turn to different directions to reach their desired destinations. ⢠This is because vehicles moving in different direction want to occupy same space at the same time
- 5. Types There are two main types of intersection of roads . ďGrade-separated intersections or interchanges ďAt-grade intersections .
- 7. Grade separated intersection or interchanges ⢠It is a bridge that eliminates crossing conflicts at intersections by vertical separation of roadways in space. ⢠Route transfer at grade separations is accommodated by interchange facilities consisting of ramps. ⢠The interchange configurations are designed in such a way to accommodate economically the traffic requirements of flow, operation on the crossing facilities, physical requirements of the topography, adjoining land use, type of controls, right-of-way and direction of movements.
- 8. Grade separated intersection or interchanges Objective ⢠The ultimate objective of grade separated intersections is to eliminate all grade crossing conflicts and to accommodate other intersecting maneuvers by merging, diverging and weaving at low relative speed.
- 9. Classification of Grade Separated Intersection One of the distinctions made in type of Interchange is between the directional and the non directional interchange. ⢠Directional interchanges are those having ramps that tend to follow the natural direction of movement. ⢠Non directional interchanges require a change in the natural path of traffic flow.
- 10. Major Interchanges ďUnderpass ďOverpass ďTrumpet Interchange ďDiamond Interchange ďCloverleaf Interchange ďPartial Cloverleaf Interchange ďDirectional Interchange ďBridged Rotary
- 11. Underpass ď§ An underpass or a tunnel is an underground passageway, completely enclosed except for openings for ingress and egress, commonly at each end. ď§ A tunnel may be for foot or vehicular road traffic, for rail traffic .
- 12. Underpass
- 13. Overpass ⢠An overpass also known as a flyover, is a bridge, road, railway or similar structure that crosses over another road or railway. ⢠A pedestrian overpass allows pedestrians safe crossing over busy roads without impacting traffic.
- 14. Overpass
- 15. Trumpet interchanges ⢠Trumpet interchanges have been used where one highway terminates at another highway. ⢠These involve at least one loop ramp connecting traffic either entering or leaving the terminating expressway with the far lanes of the continuous highway. ⢠The principal advantages are low construction cost and are useful for highways as well as toll roads.
- 17. Diamond interchange ⢠A diamond interchange is a common type of road junction, used where a freeway crosses a minor road. ⢠The diamond interchange uses less space than most types of freeway interchange, and avoids the interweaving traffic flows that occur in interchanges such as the cloverleaf. ⢠Diamond interchanges are most effective in areas where traffic is light.
- 19. Cloverleaf interchange ⢠A cloverleaf interchange is a two-level interchange in which left turns are handled by ramp roads . ⢠To go left (in right-hand traffic), vehicles first continue as one road passes over or under the other, then exit right onto a one-way three-fourths loop ramp (270°) and merge onto the intersecting road.
- 21. Partial cloverleaf interchange ⢠Partial clover leaf is a modification that combines some elements of a diamond interchange with one or more loops of a cloverleaf to eliminate only the more critical turning conflicts. ⢠It provides more acceleration and deceleration space on the freeway.
- 23. Directional interchange ⢠A Directional interchange provides direct paths for left turns. ⢠These interchanges contain ramps for one or more direct or semi direct left turning movements. ⢠Interchanges of two freeways or interchanges with one or more very heavy turning movements usually warrant direct ramps, which have higher speeds of operation and higher capacities, compared to loop ramps.
- 26. At grade intersections ⢠At-grade intersections in which all the exchanges between the roads take place on the same plane. These are of two main types: ď Standard at- grade intersections ď Round about at-grade intersections.
- 27. Key elements of intersection of road
- 28. Different types of at grade intersections
- 29. Most intersections have three or four legs, but multi-leg intersections (fiveand even six-leg intersections) are not unusual.
- 31. Flared intersections ⢠Flared intersections expand the cross-section of the street. ⢠The flaring is often done to accommodate a left-turn lane, so that left-turning bicycles and motor vehicles are removed from the through-traffic stream to increase capacity at high-volume locations, and safety on higher speed streets. ⢠Right-turn lanes, less frequently used than left-turn lanes, are usually a response to large volumes of right turns.
- 33. Simple intersections ⢠Simple intersections maintain the streetâs typical crosssection and number of lanes throughout the intersection, on both the major and minor streets. ⢠Simple intersections are best-suited to locations where auxiliary (turning) lanes are not needed to achieve the desired level-of-service
- 35. Channelized intersections ⢠Vehicles approaching an intersection are directed to definite paths by islands, marking etc. and this method of control is called channelization. ⢠Channelized intersection provides more safety and efficiency. ⢠It reduces the number of possible conflicts by reducing the area of conflicts available in the carriageway. ⢠If no channelizing is provided the driver will have less tendency to reduce the speed while entering the intersection from the carriageway.
- 37. Roundabout intersections ⢠A roundabout is a type of circular intersection or junction in which road traffic flows almost continuously in one direction around a central island. ⢠It provides maximum safety in all types of intersections .
- 40. Pedestrians ⢠Crossings and Pedestrian Curb Cut Ramp Locations ⢠Walking Speed ⢠Pedestrian Flow Capacity ⢠Traffic Control, Yielding and Delay
- 41. Bicyclists ⢠Cross-section â Bicyclists position themselves for their intended destination regardless of the presence of bike lanes or shoulders. ⢠Operating Speed â At unsignalized intersections, an average bicycle speed of 15 miles per hour can be assumed on the major street.
- 42. Bicyclists ⢠Bicycle Capacity â The number of bicycles per hour that can be accommodated by the facility under normal conditions. ⢠Traffic Control â Bicyclists are required by law to obey control devices at intersections. Therefore, traffic control devices need to account for bicycle activity.
- 43. Motor Vehicles Design Vehicle ⢠The largest type of motor vehicle that is normally expected to be accommodated through the intersection. ⢠At intersections, the most important attribute of design vehicles is their turning radius, which in turn influences the pavement corner radius and therefore the size of the intersection. ⢠Lane width, another feature related to the design vehicle, has some impact on intersection design . ⢠The design vehicle appropriate for most types of transit service is the âCity-Busâ as defined by AASHTO.
- 45. Motor Vehicles ⢠Design Speed The motor vehicle speed selected on adjoining segments of roadway. . ⢠Motor Vehicle Capacity The number of motor vehicles that can be moved through an intersection under normal conditions
- 46. Motor Vehicles Traffic Control ⢠Much like other users, motor vehicles are influenced by the type and timing of traffic control installed at an intersection, and number of other users. ⢠At roundabouts, STOP controlled and uncontrolled intersections, motor vehicle capacity and delay are influenced by conflicting traffic streams. ⢠At signalized intersections, the time provided for each movement, conflicting turning movements, and the volume and mix of other users are key influences on both motor vehicle capacity and delay.
- 47. Levels of intersection control
- 48. Levels of intersection control Passive control ďNo control ďTraffic signs ďTraffic signs plus marking .
- 49. Levels of intersection control Semi control ď Channelization ď Traffic rotaries Active control ď Traffic signals ď Grade separated intersections